Line 6 POD X3 Family manual Outputs Page 2 Studio/Direct Mix

Page 78

Reference: Configuration & Setup

Outputs Page 2: Studio/Direct Mix

		STUDIO/DIRECT MIX
	ON		ON



	TONE 1	PAN	TONE 2	PAN
	MATCH
	STUDIO/	48kHz	+12dB	S/PDIF
	DIRECT	48kHz	+12dB	S/PDIF
	DIGITAL	RATE	LEVEL	FORMAT

•This mix provides POD’s legendary direct recording sound, ideal for connecting direct to a mixer, recorder, PA, or headphones for “Studio Mode” sound.

•The headphone and USB 1-2 outputs always get this mix.

•For POD X3 Live and POD X3 Pro, this also always feeds the XLR Direct Outs.

6•4	• The 1/4-inch outputs can get this mix, too, when desired. (See next page.)
	Tone 1 – allows you to either turn On or Mute Tone 1.

Pan – sets the location of Tone 1 in the stereo field.

Tone 2 – allows you to turn On or Mute Tone 2.

Pan – sets the location of Tone 2 in the stereo field.

Digital – sets the signal for the digital output. There are four options:

•Match Studio/Direct – Digital outputs the Tone and Pan settings as shown.

•Studio/Direct Tone 1 – Digital outputs Tone 1 only, panned center.

•Studio/Direct Tone 2 – Digital outputs Tone 2 only, panned center.

•Dry Inputs – Digital Left outputs the unprocessed input(s) to Tone 1, and Digital Right outputs the unprocessed input(s) to Tone 2.

Rate – affects the digital output only, setting the S/PDIF or AES/EBU signal’s sample rate to 44.1, 48, 88.2, 96 kHz or Match Digital In.

Level – affects the digital output only, adding up to 12 dB of gain. This can be useful

Image 78

Contents POD X3 Family Serial no Please Note Table of Contents Appendix a Signal Flow Reference Configuration & SetupExample Setups USB & Computer SoftwarePage Tutorial POD X3 Live for Guitar Tweak the Amp Tone Controls Pick a Stomp Model and tweak it Show the Delay settings Tweak the EQ Turn both Tones on at once Select and Tweak Tone 1/Tone Tweak combined volume of Tone 1 + Tone Save Tutorial POD X3 & POD X3 Pro For GuitarTurn on the Amp Model DOUBLE-PRESS to Adjust Tap delay tempo Press down To select Lower row Tap is set to Preset loads into Tone These knobs and buttons control only one Tone at a time Controls & Connections PODControls & Connections Controls & Connections Tempo that you’ve tapped Input 2/Microphone In and Trim plug in your microphone here Controls & Connections Join the Club POD X3 Live Controls & Connections 310 Controls & Connections Controls & Connections 313 314 315 POD X3 Pro 316Controls & Connections 318 319 320 321 322 323 Page Getting Around, Tones & Tuner HomeBlock not selectedBlock selected Turn to tweak lower row settings Dual Tone Concept Hold Tone Volume Controls Preset Folders Recalling Presets You can also choose to recall only ToneRecalling User Presets on POD X3 Live Or only ToneLocking Tone Saving Tones410 Tuner 440HZ411 Page Reference Tweaking Tones Amp + CabTone Controls Guitar Amp Model Tone ControlsBass Amp Model Tone Controls Stomp Boxes Distortion Stomp BoxesDynamics Stomp Boxes ReferenceTweaking Tones Modulation Effects ReferenceTweaking Tones Delay 510 Reverb Gate Compressor 513514 Wah 515Volume Pedal 516Effects Loop POD X3 Live & POD X3 Pro only MIXPage Reference Configuration & Setup InputsOutputs Reference Configuration & Setup Outputs Page 2 Studio/Direct Mix System Page 1 Pedal and other settings SystemSystem Page 2 Pedal and other settings Commands Page Example Setups Mono or Stereo Recording or Direct to Mixer/PARecording Tone 1 & 2 to Separate Mono Tracks Feed One Guitar Amp Feed Two Guitar Amps, One for Tone 1 and One for ToneFeed Two Guitar Amps, One Wet and One Dry Example Setups Example Setups Example Setups Page USB & Computer Software Updating POD X3, POD X3 Live or POD X3 Pro’s FirmwareSetting Up For USB Recording USB Sends When Operating In Stereo Tone Mode Page Ppendix IgnalFlow POD X3 Live POD X3 Pro