M-Audio AIR61 user manual

Page 5

4.Knobs: You can use these eight knobs to send standard MIDI messages or to take control of mixing or plug-in parameters in HyperControl Mode, depending on the setting of the adjacent Mode buttons.

•MIDI Mode (MIDI Bank button): The knobs will send MIDI messages as assigned or according to the current preset. Press the MIDI Bank button (next to the knobs) repeatedly to switch between three banks of assignments.

•HyperControl Mix Mode (Mix button): The knobs will control common mixing functions.

•HyperControl Inst/FX Mode (Inst/FX button): The knobs will control useful parameters in the currently selected instrument or effects plug-in.

5.Faders: Axiom AIR has nine faders (eight track faders plus a master fader). Use these controls to send standard MIDI messages or to control mixing or plug-in parameters in HyperControl Mode, depending on the setting of the adjacent Mode buttons.

•MIDI Mode (MIDI Bank button): The faders will send MIDI messages as assigned or according to the current preset. Press the MIDI Bank button (next to the faders) repeatedly to switch between three banks of assignments.

•HyperControl Mix Mode (Mix button): The faders will control common mixing functions.

•HyperControl Inst/FX Mode (Inst/FX button): The faders will control useful parameters in the currently selected instrument or effects plug-in.

6.Fader Buttons: Axiom AIR has nine fader buttons (eight track fader buttons plus a master fader button). Use these controls to send standard MIDI messages or to control mixing or plug-in parameters in HyperControl Mode, depending on the setting of the adjacent Mode buttons and Select Track button to the left.

•MIDI Mode (MIDI Bank button): The fader buttons will send MIDI messages as assigned or according to the current preset. Press the MIDI Bank button (next to the faders) repeatedly to switch between three banks of assignments.

•HyperControl Mix Mode (Mix button) and HyperControl Inst/FX Mode (Inst/FX button): The fader buttons will have different functions for each track or parameter, depending on your DAW's HyperControl personality and on the setting of the adjacent Select Track button. Press it (multiple times, if necessary) to cycle through the different buttons' different modes.

7.Trigger Pads: These velocity- and aftertouch-sensitive trigger pads are perfect for composing drum parts or triggering samples in a live setting. Use the Pad Bank button to switch between three assignable banks of MIDI notes: the trigger pads will be lit red in Bank 1, green in Bank 2, and amber in Bank 3. The trigger pads also control certain software features in HyperControl Mode.

•MIDI Mode (MIDI Bank button): The trigger pads will send MIDI note and pressure- based controller data or other more advanced MIDI messages, as assigned or according to the current preset.

•Roll Mode (Roll button): Strike and hold a trigger pad to create a "roll," a rhythmic string of repeated notes. You can control the rhythm and rate of these notes with the Pad Roll parameters. Double-press this button to "latch" Roll Mode, so it stays on. Press it once again to unlatch it.

•HyperControl Mode ( button): The trigger pads will control various functions, depending on your DAW.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual DEL Usuario HyperControl Installations Box ContentsAdditional Installations Support Essential DownloadsSetup Scenario Controls & Connections Top Panel General OverviewPage Main Control Panel Rear PanelTrigger Pads Performance SettingsParameter Assign Pad LearnIdentifying Control Assignments Velocity CurvesAssigning Midi Messages to the Controls Global Midi Out Drawbar ModeMidi Settings Global Midi Channel Memory Locations Midi PanicStoring Backing Up & LoadingHyperControl Inst/FX Mode HyperControl Mix ModeHyperControl Getting StartedIdentifying Control Assignments Other ControlsControlling Ignite Transport ControlsSoporte ¡Importante Descargas esenciales Contenido de la cajaInstalaciones de HyperControl Instalaciones adicionalesRack de sincronismo externo Escenario de instalaciónControles y conexiones Panel superior Vista generalPage Panel de control principal Panel traseroPads de disparo Ajustes de interpretaciónAsignación de parámetros Para asignar una nota Midi de un pad de disparoCómo identificar las asignaciones de controles Curvas de velocidadCómo asignar mensajes Midi a los controles Salida Midi global Modo Drawbar Barra de armónicosParámetros Midi Canal Midi global Posiciones de memoria Midi Panic Pánico MidiMemorización Cómo realizar copias de seguridad y cargarModo de mezcla de HyperControl Para comenzarModo de instrumentos/efectos de HyperControl Controles de transporteCómo identificar las asignaciones de controles Otros controlesCómo controlar Ignite Controles de transporteInstallations supplémentaires Installations HyperControlContenu de la boîte Assistance Téléchargements requisScénario d’installation no Vue d’ensemble Commandes et connectiques Panneau supérieurPage Panneau arrière Commandes principalesPour régler le rythme et la durée du mode Pad Roll Configurations des commandes de jeuPads Affectation des paramètresCourbe de sensibilité Affectation des messages Midi aux commandesIdentification des affectations des commandes Canal de sortie Midi global Mode DrawbarParamètres Midi Canal Midi global Message de panique Midi Emplacements d’enregistrementSauvegarde Sauvegarde et réinitialisationMode HyperControl Inst/FX Mode HyperControl MixCommandes de lecture Vérification des commandes de lectureIdentification des affectations des commandes Autres commandesCommandes de lecture Utilisation de IgniteInstallazioni aggiuntive Installazioni dellHyperControlContenuti della confezione Assistenza Importante Download fondamentaliPedale di espressione Configurazione ScenarioInterfaccia Comandi e collegamenti Pannello superiore Panoramica generalePage Pannello comandi principale Pannello posterioreAssegnazione parametri Impostazioni prestazioniPad trigger Identificare le assegnazioni dei comandi Curva di velocitàAssegnazione di messaggi Midi ai comandi Uscita Midi globale Modalità DrawbarImpostazioni Midi Global Midi Channel canale Midi globale Back up e caricamento Sedi della memoriaMemoria Modalità HyperControl Mix Primi passiModalità Inst/FX HyperControl Comandi di trasportoIdentificare le assegnazioni dei comandi Altri comandiControllo dellIgnite Comandi di trasportoZusätzliche Installationen HyperControl InstallationLieferumfang Kundendienst Wichtig Erforderliche DownloadsSchnittstelle Setup-SzenarioBedienelemente & Anschlüsse Oberseite Allgemeiner ÜberblickPage Hauptbedienfeld RückseiteTrigger-Pads Performance-EinstellungenParameterzuweisung Pad-Learn lernfähige PadsZuweisen von MIDI-Meldungen an Bedienelemente Anschlagdynamik-KurvenBedienelementzuweisungen identifizieren ReglerGlobaler MIDI-Ausgang Drawbar-Modus Zugriegel-ModusMIDI-Einstellungen Globaler MIDI-Kanal Speicherplätze MIDI-PanikSpeichern Sichern & LadenHyperControl Mix-Modus Erste SchritteHyperControl Inst/FX-Modus Transport-ControlsBedienelementzuweisungen identifizieren Andere BedienelementeIgnite steuern Transport-ControlsKnobs Midi Mode Messages and Sub-ParametersModulation Wheel, Faders, Expression Pedal Fader Buttons, Sustain Pedal Button Behavior SettingsMMC Midi Message Types Program Change Sub-ParametersTransport Control Buttons SpecificationsAudio.com
Top Page Image Contents