Peavey V12 owner manual External-in signal-level to matrix, Illuminated mute-switch, Mute switch

Page 19

group output module—matrix, aux, group

mono-matrix features

external-in signal-level to matrix

Controls level of signal present on XLR input connector on each matrix module. It is this input that allows for customizing of backing artists gener- ic mixes as this input can represent an artists individual microphone input.

UPPER CONTROL SECTION (Default Matrix Control)

illuminated mute-switch

Controls local mute function of this output section - Default is matrix channel output. This switch illuminates red when this section is muted (Regardless of source).

µ-mute switch

Sets and indicates microprocessor mute preset status. This illuminated switch will show current µ-mute status preset as illuminated or not illu- minated. It will show preview next status as either blinking illuminated or not illumination. Status of this µ-mute can be toggled on or off by depress- ing this momentary switch. This switch may also be directly accessed by an external sequencer if operating in external control mode.

The status of the µ-mute switch is stored in local memory for the current mute scene, next, and last mute scene without the need to store any changes to permanent memory. A snapshot of this switch in either active or next (preview) mode may be stored to permanent memory if desired from within the master microprocessor controller to any of the micro- processor storage locations in addition to the current location.

This switch has no effect on the channels actual mute status until the mas- ter channel mute switch is activated within the master section of the con- sole. The µ-mute may be loaded automatically by the microprocessor sys- tem allowing sequenced (Master mute switch on at all times) or pre select- ed mute control (Master mute switch on only when mute preset is need- ed). If no microprocessor control is required,the master mute switch may be selected to manual operation, allowing this system to be preset and to perform as any other manual mute preset.

µ-mute active-LED

Will illuminate RED when the µ-Mute system is commanding this section to mute.The output master micro safe switch (located adjacent the mas- ter faders) determines whether or not the mute will actually occur. It is possible to disable the µ-mutes for all outputs.

polarity-reverse switch

Reverses the polarity of the output signal.

p. 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents V12 mixing console Mono input module Direct output featuresGroup assignment features Input features EQ features Aux features Aux send , 6, 7 Push-on/push-off switchAux send , 2, 3 VCA-level LED Monitor featuresSolo switch Segment channel meterPage Dual level control Stereo input moduleImage width control-WID Sum switchImage balance control Polarity-reverse switch Ground lift switchDual-concentric input gain control EQ features Aux features Aux send operation Dual 8-segment channel meter Page Group output module-matrix, aux, group Mono-matrix featuresMute active-LED External-in signal-level to matrixIlluminated mute-switch Mute switchOutput level-control rotary pot Insert on-switchPeak and signal-present LED Talkback preset-switchMtx master and GRP master LED indicators Aux master features AUX-master and GRP-master LED indicators Mono-assignment switch Group-assignment featuresMatrix post-switch Group-to-matrix on-switchGroup-master features Output level-control 100mm fader FOH group LED Module swap featuresMode switch recessed MTX switch recessedGroup rear-panel connectors 100mm faders Illuminated mute-switchesSolo switches Vca mastersMatrix-post switch Output mute safe switchLeft, right and mono peak and signal-present Leds Left/right/mono to matrix on-switchAct LED VCA Input fader blockAct LED µ-mute Mute safeStereo matrix / aux out module Stereo-matrix featuresExternal-in left and right signal-level to matrix Stereo matrix output-balance control Stereo matrix solo-switchMtx to aux Stereo matrix output-level controlDual-aux output features 100mm output fader One per odd channel, one per even channel Talkback preset-switch One odd channel, one even channelSolo switch Master modules-M1, M2 Oscillator featuresMeters-A/meters-B switch bank Meter-view featuresAlternate output features Provides an area to label the alternate outputs usage Talkback master features Comms level Intercom interconnect featuresConsole-to-intercom level and switch Link headphone/intercom switchMonitor output features 100mm fader level-control On-switchSum DimLeft-/right-output switch Headphone output featuresLCR output-monitoring 100mm headphone level-control Solo system features Page Micro mute system Micro panel featuresManual mute-bank select Button Channel fader featuresVCA LED on module Micro operation Normal operation modeSelect Scene to edit Edit/View Edit/preview rapid recallOther ways to exit Edit Mode Exiting Edit ModeUtilities Utility ModeMicro Utilities Clear UtilitiesShow Control General ControlsGeneral Controls Scene Resettingthe Micro Page V12 rear views Page V12 rear views
Related manuals
Manual 24 pages 8.07 Kb

V12 specifications

The Peavey V12 is a remarkable guitar amplifier that has gained a reputation for its versatility, punchy sound, and reliability. Aimed at guitarists across various genres, the V12 combines advanced technologies with user-friendly features, making it an appealing option for both amateur and professional musicians.

One of the standout features of the Peavey V12 is its power and performance. This amplifier delivers an impressive 120 watts of power, ensuring that it can handle large gigs and rehearsals with ease. Its dual gain structure allows players to explore a wide range of tone options, offering both clean sounds and high-gain distortion. This adaptability makes the V12 suitable for everything from blues to rock and metal.

The V12 boasts Peavey's patented TransTube technology, which emulates the warm, dynamic sound of tube amplifiers. This innovative technology provides a rich tonal palette, delivering the best of both worlds – the warmth of analog sound with the reliability of solid-state performance. Furthermore, the amp comes equipped with a three-channel configuration, giving users access to clean, crunch, and lead sounds at the push of a button. This makes it easy to switch between settings during live performances.

In addition to its tonal options, the Peavey V12 offers comprehensive EQ controls, including treble, mid, and bass adjustments. This allows guitarists to fine-tune their sound to suit their specific preferences and playing styles. The presence and resonance controls further enhance tonal shaping, enabling players to achieve a robust sound that cuts through the mix.

Another notable characteristic of the V12 is its durable construction. Built with high-quality materials, this amp can withstand the rigors of touring, making it a reliable choice for musicians on the road. The lightweight design also adds to its ease of transport, ensuring that musicians can take their sound anywhere.

Additional features include built-in reverb, allowing users to add depth to their tone, and a headphone output for silent practice. The amp is also compatible with footswitching, which gives players added control during performances.

In conclusion, the Peavey V12 is an exceptional amplifier that blends power, versatility, and cutting-edge technology. With its extensive sound-shaping capabilities and robust construction, it stands out as an ideal choice for guitarists seeking quality and performance in one package. Whether for practice, recording, or live performances, the V12 is designed to meet the demands of contemporary musicians.
Top Page Image Contents