Peavey V12 owner manual Micro operation, Normal operation mode

Page 54

micro mute system

micro operation

normal operation mode

1These switches are normally lit and available for use.

GO Switch

BANK SELECT

Scroll UP

Scroll DOWN

1 of 3 from Next Scene: Mute(default), Pgm, Chan

Upper Display shows Next Scene and Lower display shows Active Scene.

Both displays show data in the following format : mmm ppp cc

mmm= Scene # [001 to 128]

ppp= MIDI Pgm # [(OFF), 001 to 128] or [(OFF), 000 to 127] (Set by Utility Function- MIDI BASE)

cc= MIDI Chan # [01 to 16]

mute scene operation

2The Console has the ability to mute its channels and outputs by the use of Mute Scenes. There are 13 possible Mute Scene sources: 12 Manual Mutes (1-12), and the Sequenced Scene. There are 3 possible states the console can operate in as detailed below. Normally the console is set so that all 13 of the possible Mute sources can be used at the same time.This state is set by the Utility Function –SCENE OPER.

cummulative (default)

13 of 13 Scenes possible:Any of 12 Manual Mutes and Seq Scene

single all

Only 1 of 13 Scenes possible: 1 of 12 Man Mutes or Seq Scene

single man

2 of 13 Scenes possible: 1 of 12 Manual Mutes and Seq Scene

edit mode

3This mode allows the operator to set-up,preview or edit any of the Micro Mute Scenes.There are (14) possible edit sources: (1)Next Scene [includ- ing Rapid Recalls], (12)Man Mutes 1-12 [x12 Banks] and (1)Active Scene.

The µ-Mute switches on each channel and each output are used to assign/un-assign a mute from the Scene being edited.A momentary press on the µ-Mute switch will start/stop it from blinking yellow; the blinking indicates that a mute is assigned to that Scene.Any or all channels and out- puts can be assigned to any Mute Scene.While in Edit Mode, the current mute state of the console is maintained, the edits made will not necessar- ily affect the current mutes unless the Scene you are editing was active when you entered Edit Mode.The following steps describe how to use the Edit Mode.

p. 54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents V12 mixing console Direct output features Mono input moduleGroup assignment features Input features EQ features Aux features Push-on/push-off switch Aux send , 6, 7Aux send , 2, 3 Segment channel meter Monitor featuresSolo switch VCA-level LEDPage Stereo input module Dual level controlSum switch Image width control-WIDImage balance control Ground lift switch Polarity-reverse switchDual-concentric input gain control EQ features Aux features Aux send operation Dual 8-segment channel meter Page Mono-matrix features Group output module-matrix, aux, groupMute switch External-in signal-level to matrixIlluminated mute-switch Mute active-LEDTalkback preset-switch Insert on-switchPeak and signal-present LED Output level-control rotary potMtx master and GRP master LED indicators Aux master features AUX-master and GRP-master LED indicators Group-to-matrix on-switch Group-assignment featuresMatrix post-switch Mono-assignment switchGroup-master features Output level-control 100mm fader MTX switch recessed Module swap featuresMode switch recessed FOH group LEDGroup rear-panel connectors Vca masters Illuminated mute-switchesSolo switches 100mm fadersLeft/right/mono to matrix on-switch Output mute safe switchLeft, right and mono peak and signal-present Leds Matrix-post switchMute safe Input fader blockAct LED µ-mute Act LED VCAStereo-matrix features Stereo matrix / aux out moduleExternal-in left and right signal-level to matrix Stereo matrix output-level control Stereo matrix solo-switchMtx to aux Stereo matrix output-balance controlDual-aux output features Talkback preset-switch One odd channel, one even channel 100mm output fader One per odd channel, one per even channelSolo switch Oscillator features Master modules-M1, M2Meter-view features Meters-A/meters-B switch bankAlternate output features Provides an area to label the alternate outputs usage Talkback master features Link headphone/intercom switch Intercom interconnect featuresConsole-to-intercom level and switch Comms levelMonitor output features Dim On-switchSum 100mm fader level-controlHeadphone output features Left-/right-output switchLCR output-monitoring 100mm headphone level-control Solo system features Page Micro panel features Micro mute systemManual mute-bank select Channel fader features ButtonVCA LED on module Normal operation mode Micro operationSelect Scene to edit Edit/preview rapid recall Edit/ViewExiting Edit Mode Other ways to exit Edit ModeUtility Mode UtilitiesGeneral Controls Clear UtilitiesShow Control Micro UtilitiesGeneral Controls Scene Resettingthe Micro Page V12 rear views Page V12 rear views
Related manuals
Manual 24 pages 8.07 Kb

V12 specifications

The Peavey V12 is a remarkable guitar amplifier that has gained a reputation for its versatility, punchy sound, and reliability. Aimed at guitarists across various genres, the V12 combines advanced technologies with user-friendly features, making it an appealing option for both amateur and professional musicians.

One of the standout features of the Peavey V12 is its power and performance. This amplifier delivers an impressive 120 watts of power, ensuring that it can handle large gigs and rehearsals with ease. Its dual gain structure allows players to explore a wide range of tone options, offering both clean sounds and high-gain distortion. This adaptability makes the V12 suitable for everything from blues to rock and metal.

The V12 boasts Peavey's patented TransTube technology, which emulates the warm, dynamic sound of tube amplifiers. This innovative technology provides a rich tonal palette, delivering the best of both worlds – the warmth of analog sound with the reliability of solid-state performance. Furthermore, the amp comes equipped with a three-channel configuration, giving users access to clean, crunch, and lead sounds at the push of a button. This makes it easy to switch between settings during live performances.

In addition to its tonal options, the Peavey V12 offers comprehensive EQ controls, including treble, mid, and bass adjustments. This allows guitarists to fine-tune their sound to suit their specific preferences and playing styles. The presence and resonance controls further enhance tonal shaping, enabling players to achieve a robust sound that cuts through the mix.

Another notable characteristic of the V12 is its durable construction. Built with high-quality materials, this amp can withstand the rigors of touring, making it a reliable choice for musicians on the road. The lightweight design also adds to its ease of transport, ensuring that musicians can take their sound anywhere.

Additional features include built-in reverb, allowing users to add depth to their tone, and a headphone output for silent practice. The amp is also compatible with footswitching, which gives players added control during performances.

In conclusion, the Peavey V12 is an exceptional amplifier that blends power, versatility, and cutting-edge technology. With its extensive sound-shaping capabilities and robust construction, it stands out as an ideal choice for guitarists seeking quality and performance in one package. Whether for practice, recording, or live performances, the V12 is designed to meet the demands of contemporary musicians.
Top Page Image Contents