Peavey V12 owner manual Mtx to aux, Stereo matrix solo-switch, Stereo matrix output-level control

Page 34

stereo matrix / aux out module

stereo-matrix features

mtx to aux

When this switch is depressed, a post stereo matrix level signal is fed to the modules left and right Aux (Monitor) mix buses. An internal jumper allows the matrix to be sourced pre fader if desired. This allows generic mixes such as drums to be able to be mixed with the primary aux moni- tor outputs.

insert-on switch

Activates the stereo Insert return connector. Signal is always fed to the stereo balanced insert send connector.

peak and signal-present LED

A single dual color LED monitors pre level control stereo signal levels. Dynamic level indications are by varying the intensity of the green element of the dual color LED.The LED will turn RED if signal approaches 3dB of causing clipping of the left or right outputs.

stereo matrix solo-switch

Will illuminate when manually selected in one of the consoles many Solo modes. Controls within the master section determines if this switch will sample signal pre or post level control.

Additional switches will determine the operating characteristics of the Solo system. These may be selected from within the master section to be NORMAL (cumulative), LAST PRESSED (Only one switch will be on at a time.Selecting the next solo switch will automatically cancel the last switch selected) or MOMENTARY (Solo system on only while switch is held down).

talkback preset-switch

When selected will allow the MasterTalkback Switch and system to access the associated Stereo output matrix.

stereo matrix output-level control

Adjust the left and right output levels of this section.

stereo matrix output-balance control

Adjusts the balance between the left and right outputs.

write-on strip

Will provide a number for this group output as well as providing a write in area for the customer or a mounting surface for the customers mask- ing tape labeling.

p. 34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents V12 mixing console Direct output features Mono input moduleGroup assignment features Input features EQ features Aux features Aux send , 6, 7 Push-on/push-off switchAux send , 2, 3 Segment channel meter Monitor featuresSolo switch VCA-level LEDPage Stereo input module Dual level controlImage width control-WID Sum switchImage balance control Polarity-reverse switch Ground lift switchDual-concentric input gain control EQ features Aux features Aux send operation Dual 8-segment channel meter Page Mono-matrix features Group output module-matrix, aux, groupMute switch External-in signal-level to matrixIlluminated mute-switch Mute active-LEDTalkback preset-switch Insert on-switchPeak and signal-present LED Output level-control rotary potMtx master and GRP master LED indicators Aux master features AUX-master and GRP-master LED indicators Group-to-matrix on-switch Group-assignment featuresMatrix post-switch Mono-assignment switchGroup-master features Output level-control 100mm fader MTX switch recessed Module swap featuresMode switch recessed FOH group LEDGroup rear-panel connectors Vca masters Illuminated mute-switchesSolo switches 100mm fadersLeft/right/mono to matrix on-switch Output mute safe switchLeft, right and mono peak and signal-present Leds Matrix-post switchMute safe Input fader blockAct LED µ-mute Act LED VCAStereo-matrix features Stereo matrix / aux out moduleExternal-in left and right signal-level to matrix Stereo matrix output-level control Stereo matrix solo-switchMtx to aux Stereo matrix output-balance controlDual-aux output features Talkback preset-switch One odd channel, one even channel 100mm output fader One per odd channel, one per even channelSolo switch Oscillator features Master modules-M1, M2Meter-view features Meters-A/meters-B switch bankAlternate output features Provides an area to label the alternate outputs usage Talkback master features Link headphone/intercom switch Intercom interconnect featuresConsole-to-intercom level and switch Comms levelMonitor output features Dim On-switchSum 100mm fader level-controlLeft-/right-output switch Headphone output featuresLCR output-monitoring 100mm headphone level-control Solo system features Page Micro panel features Micro mute systemManual mute-bank select Channel fader features ButtonVCA LED on module Normal operation mode Micro operationSelect Scene to edit Edit/preview rapid recall Edit/ViewExiting Edit Mode Other ways to exit Edit ModeUtility Mode UtilitiesGeneral Controls Clear UtilitiesShow Control Micro UtilitiesGeneral Controls Scene Resettingthe Micro Page V12 rear views Page V12 rear views
Related manuals
Manual 24 pages 8.07 Kb

V12 specifications

The Peavey V12 is a remarkable guitar amplifier that has gained a reputation for its versatility, punchy sound, and reliability. Aimed at guitarists across various genres, the V12 combines advanced technologies with user-friendly features, making it an appealing option for both amateur and professional musicians.

One of the standout features of the Peavey V12 is its power and performance. This amplifier delivers an impressive 120 watts of power, ensuring that it can handle large gigs and rehearsals with ease. Its dual gain structure allows players to explore a wide range of tone options, offering both clean sounds and high-gain distortion. This adaptability makes the V12 suitable for everything from blues to rock and metal.

The V12 boasts Peavey's patented TransTube technology, which emulates the warm, dynamic sound of tube amplifiers. This innovative technology provides a rich tonal palette, delivering the best of both worlds – the warmth of analog sound with the reliability of solid-state performance. Furthermore, the amp comes equipped with a three-channel configuration, giving users access to clean, crunch, and lead sounds at the push of a button. This makes it easy to switch between settings during live performances.

In addition to its tonal options, the Peavey V12 offers comprehensive EQ controls, including treble, mid, and bass adjustments. This allows guitarists to fine-tune their sound to suit their specific preferences and playing styles. The presence and resonance controls further enhance tonal shaping, enabling players to achieve a robust sound that cuts through the mix.

Another notable characteristic of the V12 is its durable construction. Built with high-quality materials, this amp can withstand the rigors of touring, making it a reliable choice for musicians on the road. The lightweight design also adds to its ease of transport, ensuring that musicians can take their sound anywhere.

Additional features include built-in reverb, allowing users to add depth to their tone, and a headphone output for silent practice. The amp is also compatible with footswitching, which gives players added control during performances.

In conclusion, the Peavey V12 is an exceptional amplifier that blends power, versatility, and cutting-edge technology. With its extensive sound-shaping capabilities and robust construction, it stands out as an ideal choice for guitarists seeking quality and performance in one package. Whether for practice, recording, or live performances, the V12 is designed to meet the demands of contemporary musicians.
Top Page Image Contents