Peavey V12 owner manual Talkback preset-switch One odd channel, one even channel

Page 36

stereo matrix / aux out module

dual-aux output features

talkback preset-switch

(one odd channel, one even channel)

When selected will allow the MasterTalkback Switch and system to access this particular output.

µ-mute switch

Sets and indicates microprocessor mute preset status. This illuminated switch will show current µ mute status preset as illuminated or not illu- minated. It will show preview next status as either blinking illuminated or not illumination. Status of this µ mute can be toggled on or off by depress- ing this momentary switch. This switch may also be directly accessed by an external sequencer if operating in external control mode.

The status of the µ mute switch is stored in local memory for the current mute scene, next, and last mute scene without the need to store any changes to permanent memory. A snapshot of this switch in either active or next (preview) mode may be stored to permanent memory if desired from within the master microprocessor controller to any of the micro- processor storage locations in addition to the current location.

This switch has no effect on the channels actual mute status until the mas- ter channel mute switch is activated within the master section of the con- sole. The µ mute may be loaded automatically by the microprocessor sys- tem allowing sequenced (Master mute switch on at all times) or pre select- ed mute control (Master mute switch on only when mute preset is need- ed). If no microprocessor control is required,the master mute switch may be selected to manual operation, allowing this system to be preset and to perform as any other manual mute preset.

µ-mute active-LED

Will illuminate RED when the µ-Mute system is commanding this section to mute.The output master micro safe switch (located adjacent the mas- ter faders) determines whether or not the mute will actually occur. It is possible to disable the µ-mutes for all outputs.

illuminated mute-switch

Controls local mute function of this output. This switch illuminates red when this section is muted (Regardless of source).

100mm output fader

(one per odd channel, one per even channel)

High quality fader per each aux output.

p. 36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents V12 mixing console Direct output features Mono input moduleGroup assignment features Input features EQ features Aux features Push-on/push-off switch Aux send , 6, 7Aux send , 2, 3 Monitor features Solo switchSegment channel meter VCA-level LEDPage Stereo input module Dual level controlSum switch Image width control-WIDImage balance control Ground lift switch Polarity-reverse switchDual-concentric input gain control EQ features Aux features Aux send operation Dual 8-segment channel meter Page Mono-matrix features Group output module-matrix, aux, groupExternal-in signal-level to matrix Illuminated mute-switchMute switch Mute active-LEDInsert on-switch Peak and signal-present LEDTalkback preset-switch Output level-control rotary potMtx master and GRP master LED indicators Aux master features AUX-master and GRP-master LED indicators Group-assignment features Matrix post-switchGroup-to-matrix on-switch Mono-assignment switchGroup-master features Output level-control 100mm fader Module swap features Mode switch recessedMTX switch recessed FOH group LEDGroup rear-panel connectors Illuminated mute-switches Solo switchesVca masters 100mm fadersOutput mute safe switch Left, right and mono peak and signal-present LedsLeft/right/mono to matrix on-switch Matrix-post switchInput fader block Act LED µ-muteMute safe Act LED VCAStereo-matrix features Stereo matrix / aux out moduleExternal-in left and right signal-level to matrix Stereo matrix solo-switch Mtx to auxStereo matrix output-level control Stereo matrix output-balance controlDual-aux output features Talkback preset-switch One odd channel, one even channel 100mm output fader One per odd channel, one per even channelSolo switch Oscillator features Master modules-M1, M2Meter-view features Meters-A/meters-B switch bankAlternate output features Provides an area to label the alternate outputs usage Talkback master features Intercom interconnect features Console-to-intercom level and switchLink headphone/intercom switch Comms levelMonitor output features On-switch SumDim 100mm fader level-controlHeadphone output features Left-/right-output switchLCR output-monitoring 100mm headphone level-control Solo system features Page Micro panel features Micro mute systemManual mute-bank select Channel fader features ButtonVCA LED on module Normal operation mode Micro operationSelect Scene to edit Edit/preview rapid recall Edit/ViewExiting Edit Mode Other ways to exit Edit ModeUtility Mode UtilitiesClear Utilities Show ControlGeneral Controls Micro UtilitiesGeneral Controls Scene Resettingthe Micro Page V12 rear views Page V12 rear views
Related manuals
Manual 24 pages 8.07 Kb

V12 specifications

The Peavey V12 is a remarkable guitar amplifier that has gained a reputation for its versatility, punchy sound, and reliability. Aimed at guitarists across various genres, the V12 combines advanced technologies with user-friendly features, making it an appealing option for both amateur and professional musicians.

One of the standout features of the Peavey V12 is its power and performance. This amplifier delivers an impressive 120 watts of power, ensuring that it can handle large gigs and rehearsals with ease. Its dual gain structure allows players to explore a wide range of tone options, offering both clean sounds and high-gain distortion. This adaptability makes the V12 suitable for everything from blues to rock and metal.

The V12 boasts Peavey's patented TransTube technology, which emulates the warm, dynamic sound of tube amplifiers. This innovative technology provides a rich tonal palette, delivering the best of both worlds – the warmth of analog sound with the reliability of solid-state performance. Furthermore, the amp comes equipped with a three-channel configuration, giving users access to clean, crunch, and lead sounds at the push of a button. This makes it easy to switch between settings during live performances.

In addition to its tonal options, the Peavey V12 offers comprehensive EQ controls, including treble, mid, and bass adjustments. This allows guitarists to fine-tune their sound to suit their specific preferences and playing styles. The presence and resonance controls further enhance tonal shaping, enabling players to achieve a robust sound that cuts through the mix.

Another notable characteristic of the V12 is its durable construction. Built with high-quality materials, this amp can withstand the rigors of touring, making it a reliable choice for musicians on the road. The lightweight design also adds to its ease of transport, ensuring that musicians can take their sound anywhere.

Additional features include built-in reverb, allowing users to add depth to their tone, and a headphone output for silent practice. The amp is also compatible with footswitching, which gives players added control during performances.

In conclusion, the Peavey V12 is an exceptional amplifier that blends power, versatility, and cutting-edge technology. With its extensive sound-shaping capabilities and robust construction, it stands out as an ideal choice for guitarists seeking quality and performance in one package. Whether for practice, recording, or live performances, the V12 is designed to meet the demands of contemporary musicians.
Top Page Image Contents