Peavey V12 Intercom interconnect features, Console-to-intercom level and switch, Comms level

Page 43

master modules—M1, M2

intercom interconnect features

The console is designed to interconnect with a ClearCom compatible intercom system. Three-pin male and female XLR’s are located on the console rear-panel for intercom hookup and loop-thru.A separate four pin XLR connector is located under the arm rest for connection to a standard intercom headset.

console-to-intercom level and switch

Controls the amount of console signal fed to the intercom system as selected by the source selection switches located within the headphone system.

link headphone/intercom switch

Allows both intercom and console signals to be monitored on the high quality system headphones AND the intercom headset.

comms level

This control determines the level of the intercom signal in the COMMS headset or, if the link phones switch is depressed, the amount of intercom signal mixed into the console headphones.

call button

Sends an intercom call command when pressed, and will also illuminate to indicate a call signal is being received.The operator also has the option, by way of the COMMS FLASH switch, of having the console Little-Lites flash upon receiving a call signal. Additionally,hi-intensity blue LEDs in the meter bridge will flash when a call signal is received.Their brightness is controlled by the COMMS CALL LED switch in the upper section of the module.

p. 43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents V12 mixing console Mono input module Direct output featuresGroup assignment features Input features EQ features Aux features Aux send , 6, 7 Push-on/push-off switchAux send , 2, 3 VCA-level LED Monitor featuresSolo switch Segment channel meterPage Dual level control Stereo input moduleImage width control-WID Sum switchImage balance control Polarity-reverse switch Ground lift switchDual-concentric input gain control EQ features Aux features Aux send operation Dual 8-segment channel meter Page Group output module-matrix, aux, group Mono-matrix featuresMute active-LED External-in signal-level to matrixIlluminated mute-switch Mute switchOutput level-control rotary pot Insert on-switchPeak and signal-present LED Talkback preset-switchMtx master and GRP master LED indicators Aux master features AUX-master and GRP-master LED indicators Mono-assignment switch Group-assignment featuresMatrix post-switch Group-to-matrix on-switchGroup-master features Output level-control 100mm fader FOH group LED Module swap featuresMode switch recessed MTX switch recessedGroup rear-panel connectors 100mm faders Illuminated mute-switchesSolo switches Vca mastersMatrix-post switch Output mute safe switchLeft, right and mono peak and signal-present Leds Left/right/mono to matrix on-switchAct LED VCA Input fader blockAct LED µ-mute Mute safeStereo matrix / aux out module Stereo-matrix featuresExternal-in left and right signal-level to matrix Stereo matrix output-balance control Stereo matrix solo-switchMtx to aux Stereo matrix output-level controlDual-aux output features 100mm output fader One per odd channel, one per even channel Talkback preset-switch One odd channel, one even channelSolo switch Master modules-M1, M2 Oscillator featuresMeters-A/meters-B switch bank Meter-view featuresAlternate output features Provides an area to label the alternate outputs usage Talkback master features Comms level Intercom interconnect featuresConsole-to-intercom level and switch Link headphone/intercom switchMonitor output features 100mm fader level-control On-switchSum DimLeft-/right-output switch Headphone output featuresLCR output-monitoring 100mm headphone level-control Solo system features Page Micro mute system Micro panel featuresManual mute-bank select Button Channel fader featuresVCA LED on module Micro operation Normal operation modeSelect Scene to edit Edit/View Edit/preview rapid recallOther ways to exit Edit Mode Exiting Edit ModeUtilities Utility ModeMicro Utilities Clear UtilitiesShow Control General ControlsGeneral Controls Scene Resettingthe Micro Page V12 rear views Page V12 rear views
Related manuals
Manual 24 pages 8.07 Kb

V12 specifications

The Peavey V12 is a remarkable guitar amplifier that has gained a reputation for its versatility, punchy sound, and reliability. Aimed at guitarists across various genres, the V12 combines advanced technologies with user-friendly features, making it an appealing option for both amateur and professional musicians.

One of the standout features of the Peavey V12 is its power and performance. This amplifier delivers an impressive 120 watts of power, ensuring that it can handle large gigs and rehearsals with ease. Its dual gain structure allows players to explore a wide range of tone options, offering both clean sounds and high-gain distortion. This adaptability makes the V12 suitable for everything from blues to rock and metal.

The V12 boasts Peavey's patented TransTube technology, which emulates the warm, dynamic sound of tube amplifiers. This innovative technology provides a rich tonal palette, delivering the best of both worlds – the warmth of analog sound with the reliability of solid-state performance. Furthermore, the amp comes equipped with a three-channel configuration, giving users access to clean, crunch, and lead sounds at the push of a button. This makes it easy to switch between settings during live performances.

In addition to its tonal options, the Peavey V12 offers comprehensive EQ controls, including treble, mid, and bass adjustments. This allows guitarists to fine-tune their sound to suit their specific preferences and playing styles. The presence and resonance controls further enhance tonal shaping, enabling players to achieve a robust sound that cuts through the mix.

Another notable characteristic of the V12 is its durable construction. Built with high-quality materials, this amp can withstand the rigors of touring, making it a reliable choice for musicians on the road. The lightweight design also adds to its ease of transport, ensuring that musicians can take their sound anywhere.

Additional features include built-in reverb, allowing users to add depth to their tone, and a headphone output for silent practice. The amp is also compatible with footswitching, which gives players added control during performances.

In conclusion, the Peavey V12 is an exceptional amplifier that blends power, versatility, and cutting-edge technology. With its extensive sound-shaping capabilities and robust construction, it stands out as an ideal choice for guitarists seeking quality and performance in one package. Whether for practice, recording, or live performances, the V12 is designed to meet the demands of contemporary musicians.
Top Page Image Contents