Peavey V12 owner manual External-in left and right signal-level to matrix, Illuminated mute-switch

Page 33

stereo matrix / aux out module

stereo-matrix features

external-in left and right signal-level to matrix

Dual Concentric level control pair with center controlling left XLR line input to left matrix output and the outside controlling the right XLR line input to the right matrix output. It is this set of inputs that allows for cus- tomizing of backing artists generic mixes, as these inputs can represent an artists microphone inputs.

illuminated mute-switch

Controls local mute function of this stereo matrix output. This switch illu- minates red when this section is muted (Regardless of source).

µ-mute switch

Sets and indicates microprocessor mute preset status of this stereo matrix output. This illuminated switch will show current µ-mute status preset as illuminated or not illuminated. It will show preview next status as either blinking illuminated or not illumination. Status of this µ-mute can be toggled on or off by depressing this momentary switch. This switch may also be directly accessed by an external sequencer if operating in external control mode.

The status of the µ-mute switch is stored in local memory for the current mute scene, next, and last mute scene without the need to store any changes to permanent memory. A snapshot of this switch in either active or next (preview) mode may be stored to permanent memory if desired from within the master microprocessor controller to any of the micro- processor storage locations in addition to the current location.

This switch has no effect on the stereo matrixes actual mute status until the master output mute switch is activated within the master section of the console. The µ-mute may be loaded automatically by the micro- processor system allowing sequenced (Master mute switch on at all times) or pre selected mute control (Master mute switch on only when mute preset is needed). If no microprocessor control is required, the master mute switch may be selected to manual operation, allowing this system to be preset and to perform as any other manual mute preset.

µ-mute active-LED

Will illuminate RED when the µ-Mute system is commanding this section to mute.The output master micro safe switch (located adjacent the mas- ter faders) determines whether or not the mute will actually occur. It is possible to disable the µ-mutes for all outputs.

p. 33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents V12 mixing console Mono input module Direct output featuresGroup assignment features Input features EQ features Aux features Push-on/push-off switch Aux send , 6, 7Aux send , 2, 3 Solo switch Monitor featuresSegment channel meter VCA-level LEDPage Dual level control Stereo input moduleSum switch Image width control-WIDImage balance control Ground lift switch Polarity-reverse switchDual-concentric input gain control EQ features Aux features Aux send operation Dual 8-segment channel meter Page Group output module-matrix, aux, group Mono-matrix featuresIlluminated mute-switch External-in signal-level to matrixMute switch Mute active-LEDPeak and signal-present LED Insert on-switchTalkback preset-switch Output level-control rotary potMtx master and GRP master LED indicators Aux master features AUX-master and GRP-master LED indicators Matrix post-switch Group-assignment featuresGroup-to-matrix on-switch Mono-assignment switchGroup-master features Output level-control 100mm fader Mode switch recessed Module swap featuresMTX switch recessed FOH group LEDGroup rear-panel connectors Solo switches Illuminated mute-switchesVca masters 100mm fadersLeft, right and mono peak and signal-present Leds Output mute safe switchLeft/right/mono to matrix on-switch Matrix-post switchAct LED µ-mute Input fader blockMute safe Act LED VCAStereo matrix / aux out module Stereo-matrix featuresExternal-in left and right signal-level to matrix Mtx to aux Stereo matrix solo-switchStereo matrix output-level control Stereo matrix output-balance controlDual-aux output features 100mm output fader One per odd channel, one per even channel Talkback preset-switch One odd channel, one even channelSolo switch Master modules-M1, M2 Oscillator featuresMeters-A/meters-B switch bank Meter-view featuresAlternate output features Provides an area to label the alternate outputs usage Talkback master features Console-to-intercom level and switch Intercom interconnect featuresLink headphone/intercom switch Comms levelMonitor output features Sum On-switchDim 100mm fader level-controlHeadphone output features Left-/right-output switchLCR output-monitoring 100mm headphone level-control Solo system features Page Micro mute system Micro panel featuresManual mute-bank select Button Channel fader featuresVCA LED on module Micro operation Normal operation modeSelect Scene to edit Edit/View Edit/preview rapid recallOther ways to exit Edit Mode Exiting Edit ModeUtilities Utility ModeShow Control Clear UtilitiesGeneral Controls Micro UtilitiesGeneral Controls Scene Resettingthe Micro Page V12 rear views Page V12 rear views
Related manuals
Manual 24 pages 8.07 Kb

V12 specifications

The Peavey V12 is a remarkable guitar amplifier that has gained a reputation for its versatility, punchy sound, and reliability. Aimed at guitarists across various genres, the V12 combines advanced technologies with user-friendly features, making it an appealing option for both amateur and professional musicians.

One of the standout features of the Peavey V12 is its power and performance. This amplifier delivers an impressive 120 watts of power, ensuring that it can handle large gigs and rehearsals with ease. Its dual gain structure allows players to explore a wide range of tone options, offering both clean sounds and high-gain distortion. This adaptability makes the V12 suitable for everything from blues to rock and metal.

The V12 boasts Peavey's patented TransTube technology, which emulates the warm, dynamic sound of tube amplifiers. This innovative technology provides a rich tonal palette, delivering the best of both worlds – the warmth of analog sound with the reliability of solid-state performance. Furthermore, the amp comes equipped with a three-channel configuration, giving users access to clean, crunch, and lead sounds at the push of a button. This makes it easy to switch between settings during live performances.

In addition to its tonal options, the Peavey V12 offers comprehensive EQ controls, including treble, mid, and bass adjustments. This allows guitarists to fine-tune their sound to suit their specific preferences and playing styles. The presence and resonance controls further enhance tonal shaping, enabling players to achieve a robust sound that cuts through the mix.

Another notable characteristic of the V12 is its durable construction. Built with high-quality materials, this amp can withstand the rigors of touring, making it a reliable choice for musicians on the road. The lightweight design also adds to its ease of transport, ensuring that musicians can take their sound anywhere.

Additional features include built-in reverb, allowing users to add depth to their tone, and a headphone output for silent practice. The amp is also compatible with footswitching, which gives players added control during performances.

In conclusion, the Peavey V12 is an exceptional amplifier that blends power, versatility, and cutting-edge technology. With its extensive sound-shaping capabilities and robust construction, it stands out as an ideal choice for guitarists seeking quality and performance in one package. Whether for practice, recording, or live performances, the V12 is designed to meet the demands of contemporary musicians.
Top Page Image Contents