Peavey V12 owner manual General Controls

Page 60

micro mute system

p. 60

MIDI Note info received on correct MIDI chan controls Chan mutes(for play- back from MIDI sequencer)

OFF No Note info sent or received

MIDI LOAD Reloads Mute Scenes & Manual Mutes.

Uses Sysex command for dump and load.

MIDI DUMP Dumps all 128 Mute Scenes and all banks of Manual Mutes.

Clear Utilities

CLR SEQ MTClears all mutes in the 128 Seq Scene memories

CLR SEQ PC Clears (sets to off) all MIDI Pgm Chngs in the 128 Scenes- MIDI channel set back to default

CLR MM BNK

Clears all Manual Mutes in current Bank

CLR MM ALL Clears all Manual Mutes in all Banks

Show Control

SHOW CTRL NOTE: If Show Control is ON, the V-12 Micro is put into Show Control Mode.The GO button no longer controls Next Scene to Active Scene transfer. The Manual Mutes will still function, but the Sequenced Scene system is disabled (no GO command) along with the Edit Mode.

Currently, this is the list of MSC data that the V-12 supports (V-12 soft ware Rev 0.94)

The V-12 only sends MSC data (Note: MSC = MIDI Show Control)

OFF

Normal Console Operation

ON

Lower Display reads "SHOW CTRL "

 

Upper Display reads "STOP RSM"

 

Pressing GO sends MIDI Show Ctrl "GO" command

 

Pressing MUTE sends MSC "STOP" Command

 

Pressing CHAN sends MSC "RESUME" command

 

Pressing UP ARROW sends MSC "Standby +"" command

 

Pressing DOWN ARROW sends MSC "Standby -" command

 

Pressing RECALL LAST sends MSC "LAST" command

General Controls

BRIGHTNESS Sets brightness of both Next and Active displays.

REV LEVEL

Show current Software Revision level: (This info correct for

REV 0.94)

 

MUTE MODE Sets how many of the possible 13 Mute Scenes can be active at the same time:

12 Man Mutes, 1 Seq Mute

CUMULATIVE13 of 13 Scenes possible:Any Manual Mutes and Seq Scene

SINGLE_ALLOnly 1 of 13 Scenes possible: 1 of 12 Man Mutes or Seq Scene

Page 59 Page 61
Image 60
Page 59 Page 61
Contents V12 mixing console Direct output features Mono input moduleGroup assignment features Input features EQ features Aux features Push-on/push-off switch Aux send , 6, 7Aux send , 2, 3 Monitor features Solo switchSegment channel meter VCA-level LEDPage Stereo input module Dual level controlSum switch Image width control-WIDImage balance control Ground lift switch Polarity-reverse switchDual-concentric input gain control EQ features Aux features Aux send operation Dual 8-segment channel meter Page Mono-matrix features Group output module-matrix, aux, groupExternal-in signal-level to matrix Illuminated mute-switchMute switch Mute active-LEDInsert on-switch Peak and signal-present LEDTalkback preset-switch Output level-control rotary potMtx master and GRP master LED indicators Aux master features AUX-master and GRP-master LED indicators Group-assignment features Matrix post-switchGroup-to-matrix on-switch Mono-assignment switchGroup-master features Output level-control 100mm fader Module swap features Mode switch recessedMTX switch recessed FOH group LEDGroup rear-panel connectors Illuminated mute-switches Solo switchesVca masters 100mm fadersOutput mute safe switch Left, right and mono peak and signal-present LedsLeft/right/mono to matrix on-switch Matrix-post switchInput fader block Act LED µ-muteMute safe Act LED VCAStereo-matrix features Stereo matrix / aux out moduleExternal-in left and right signal-level to matrix Stereo matrix solo-switch Mtx to auxStereo matrix output-level control Stereo matrix output-balance controlDual-aux output features Talkback preset-switch One odd channel, one even channel 100mm output fader One per odd channel, one per even channelSolo switch Oscillator features Master modules-M1, M2Meter-view features Meters-A/meters-B switch bankAlternate output features Provides an area to label the alternate outputs usage Talkback master features Intercom interconnect features Console-to-intercom level and switchLink headphone/intercom switch Comms levelMonitor output features On-switch SumDim 100mm fader level-controlHeadphone output features Left-/right-output switchLCR output-monitoring 100mm headphone level-control Solo system features Page Micro panel features Micro mute systemManual mute-bank select Channel fader features ButtonVCA LED on module Normal operation mode Micro operationSelect Scene to edit Edit/preview rapid recall Edit/ViewExiting Edit Mode Other ways to exit Edit ModeUtility Mode UtilitiesClear Utilities Show ControlGeneral Controls Micro UtilitiesGeneral Controls Scene Resettingthe Micro Page V12 rear views Page V12 rear views
Related manuals
Manual 24 pages 8.07 Kb

V12 specifications

The Peavey V12 is a remarkable guitar amplifier that has gained a reputation for its versatility, punchy sound, and reliability. Aimed at guitarists across various genres, the V12 combines advanced technologies with user-friendly features, making it an appealing option for both amateur and professional musicians.

One of the standout features of the Peavey V12 is its power and performance. This amplifier delivers an impressive 120 watts of power, ensuring that it can handle large gigs and rehearsals with ease. Its dual gain structure allows players to explore a wide range of tone options, offering both clean sounds and high-gain distortion. This adaptability makes the V12 suitable for everything from blues to rock and metal.

The V12 boasts Peavey's patented TransTube technology, which emulates the warm, dynamic sound of tube amplifiers. This innovative technology provides a rich tonal palette, delivering the best of both worlds – the warmth of analog sound with the reliability of solid-state performance. Furthermore, the amp comes equipped with a three-channel configuration, giving users access to clean, crunch, and lead sounds at the push of a button. This makes it easy to switch between settings during live performances.

In addition to its tonal options, the Peavey V12 offers comprehensive EQ controls, including treble, mid, and bass adjustments. This allows guitarists to fine-tune their sound to suit their specific preferences and playing styles. The presence and resonance controls further enhance tonal shaping, enabling players to achieve a robust sound that cuts through the mix.

Another notable characteristic of the V12 is its durable construction. Built with high-quality materials, this amp can withstand the rigors of touring, making it a reliable choice for musicians on the road. The lightweight design also adds to its ease of transport, ensuring that musicians can take their sound anywhere.

Additional features include built-in reverb, allowing users to add depth to their tone, and a headphone output for silent practice. The amp is also compatible with footswitching, which gives players added control during performances.

In conclusion, the Peavey V12 is an exceptional amplifier that blends power, versatility, and cutting-edge technology. With its extensive sound-shaping capabilities and robust construction, it stands out as an ideal choice for guitarists seeking quality and performance in one package. Whether for practice, recording, or live performances, the V12 is designed to meet the demands of contemporary musicians.
Top Page Image Contents