Peavey V12 owner manual Scene

Page 61

micro mute system

SINGLE_MAN 2 of 13 Scenes possible: 1 of 12 Manual Mutes and Seq

Scene

Micro Utilities

MAIN MICRO If set to OFF, completely disables Micro section. Both dis- plays and all buttons are turned off.

Note: If this setting is selected, upon exiting Util Mode, the micro will appear to be non-functioning. No lites or displays will be on.The only button that will do anything is the UTILITY key. Press this key to get back into UTIL- ITY Mode. If Password is set along with Main Micro Off, the only way for someone to restore any micro function is to enter the correct password and change the Micro setting.

MAN MUTES If set to OFF, disables the Man Mutes from being accessed or edited. Man Mute & Bank Sel Switches all off.

SEQ SCENES If set to OFF, disables the Seq Mutes from being accessed or edited. Next Scene and Active Scene Displays off, NEXT, LAST, SEQ SCENE all off.

RPD RECALL Determines what happens when a Rapid Recall (RR) button is pressed in Operating Mode.

TO NEXT RR Scene# is placed into Next Scene Display,Active Scene unaf- fected

TO ACTIVE RR Scene # is sent directly to Active Scene. Next Scene is unaf- fected.

TO ACT+NXT RR Scene # is sent directly to Active Scene. Next Scene is set to value of RR Scene# +1.

PASSWORD SET_PSWORD Allows the user to set a password to con- trol access to the Utility functions. Password comes up as last option in Utility menu by default. If no password is currently set, SET_PSWORD shows in the upper display and the STORE key is lit. Pressing STORE changes upper display to ENTR_PSWRD and the lower display to PSWRD=????. RR keys 1-10 are used to enter the password, 4 digits only. Each press of a RR key changes a "?" to an "*".When initially setting a password, the user is prompted to enter it twice to insure that it is correct. Once a password has been successfully entered, the system exits Utility mode.

PSWRD=???? Once a password has been set, the user is asked to enter a password whenever the Utility Mode is selected.ENTR_PSWRD shows in the upper display, and PSWRD=???? is on the lower display. Further access to Utilities is locked out unless the correct password is entered. Each press of a

RRkey changes a "?" to an "*" Once 4 digits are entered:

If incorrect- Display shows: "TRY _AGAIN".There is no limit to the amount of entry attempts.

If correct- User is allowed access to Utilities- first function in Utility list is then displayed.

Note:The password remains active until it is cleared (with the

CLR_PSWORD function).

CLR_PSWORD Once a correct password has been entered, the user has the option of clearing the password (returns password to default OFF state)

Page 60 Page 62
Image 61
Page 60 Page 62
Contents V12 mixing console Mono input module Direct output featuresGroup assignment features Input features EQ features Aux features Aux send , 6, 7 Push-on/push-off switchAux send , 2, 3 Solo switch Monitor featuresSegment channel meter VCA-level LEDPage Dual level control Stereo input moduleImage width control-WID Sum switchImage balance control Polarity-reverse switch Ground lift switchDual-concentric input gain control EQ features Aux features Aux send operation Dual 8-segment channel meter Page Group output module-matrix, aux, group Mono-matrix featuresIlluminated mute-switch External-in signal-level to matrixMute switch Mute active-LEDPeak and signal-present LED Insert on-switchTalkback preset-switch Output level-control rotary potMtx master and GRP master LED indicators Aux master features AUX-master and GRP-master LED indicators Matrix post-switch Group-assignment featuresGroup-to-matrix on-switch Mono-assignment switchGroup-master features Output level-control 100mm fader Mode switch recessed Module swap featuresMTX switch recessed FOH group LEDGroup rear-panel connectors Solo switches Illuminated mute-switchesVca masters 100mm fadersLeft, right and mono peak and signal-present Leds Output mute safe switchLeft/right/mono to matrix on-switch Matrix-post switchAct LED µ-mute Input fader blockMute safe Act LED VCAStereo matrix / aux out module Stereo-matrix featuresExternal-in left and right signal-level to matrix Mtx to aux Stereo matrix solo-switchStereo matrix output-level control Stereo matrix output-balance controlDual-aux output features 100mm output fader One per odd channel, one per even channel Talkback preset-switch One odd channel, one even channelSolo switch Master modules-M1, M2 Oscillator featuresMeters-A/meters-B switch bank Meter-view featuresAlternate output features Provides an area to label the alternate outputs usage Talkback master features Console-to-intercom level and switch Intercom interconnect featuresLink headphone/intercom switch Comms levelMonitor output features Sum On-switchDim 100mm fader level-controlLeft-/right-output switch Headphone output featuresLCR output-monitoring 100mm headphone level-control Solo system features Page Micro mute system Micro panel featuresManual mute-bank select Button Channel fader featuresVCA LED on module Micro operation Normal operation modeSelect Scene to edit Edit/View Edit/preview rapid recallOther ways to exit Edit Mode Exiting Edit ModeUtilities Utility ModeShow Control Clear UtilitiesGeneral Controls Micro UtilitiesGeneral Controls Scene Resettingthe Micro Page V12 rear views Page V12 rear views
Related manuals
Manual 24 pages 8.07 Kb

V12 specifications

The Peavey V12 is a remarkable guitar amplifier that has gained a reputation for its versatility, punchy sound, and reliability. Aimed at guitarists across various genres, the V12 combines advanced technologies with user-friendly features, making it an appealing option for both amateur and professional musicians.

One of the standout features of the Peavey V12 is its power and performance. This amplifier delivers an impressive 120 watts of power, ensuring that it can handle large gigs and rehearsals with ease. Its dual gain structure allows players to explore a wide range of tone options, offering both clean sounds and high-gain distortion. This adaptability makes the V12 suitable for everything from blues to rock and metal.

The V12 boasts Peavey's patented TransTube technology, which emulates the warm, dynamic sound of tube amplifiers. This innovative technology provides a rich tonal palette, delivering the best of both worlds – the warmth of analog sound with the reliability of solid-state performance. Furthermore, the amp comes equipped with a three-channel configuration, giving users access to clean, crunch, and lead sounds at the push of a button. This makes it easy to switch between settings during live performances.

In addition to its tonal options, the Peavey V12 offers comprehensive EQ controls, including treble, mid, and bass adjustments. This allows guitarists to fine-tune their sound to suit their specific preferences and playing styles. The presence and resonance controls further enhance tonal shaping, enabling players to achieve a robust sound that cuts through the mix.

Another notable characteristic of the V12 is its durable construction. Built with high-quality materials, this amp can withstand the rigors of touring, making it a reliable choice for musicians on the road. The lightweight design also adds to its ease of transport, ensuring that musicians can take their sound anywhere.

Additional features include built-in reverb, allowing users to add depth to their tone, and a headphone output for silent practice. The amp is also compatible with footswitching, which gives players added control during performances.

In conclusion, the Peavey V12 is an exceptional amplifier that blends power, versatility, and cutting-edge technology. With its extensive sound-shaping capabilities and robust construction, it stands out as an ideal choice for guitarists seeking quality and performance in one package. Whether for practice, recording, or live performances, the V12 is designed to meet the demands of contemporary musicians.
Top Page Image Contents