Peavey V12 owner manual Utility Mode, Utilities

Page 58

micro mute system

If an Active Scene had been edited and then RECALL LAST is pressed,the edited Active Scene is transferred up to the Next Scene display.The only thing that could have been edited on the Active Scene was the mute pat- tern. The Mute Scene number would have remained the same. The restored Next Scene now is showing an * to the right of the Mute #. If the user presses EDIT to enter Edit Mode, the STORE lite will come on indi- cating that this data is changed from what is stored in that Mute Scene. Pressing STORE will write the edited data into the scene and the * will go away and the STORE lite will go out.

Utility Mode

5 A number of Utility Functions are provided for the user.

A more detailed list follows the set-up description.

From Operation Mode: Press UTILITY key- it starts blinking, indicating

Utility Mode.

Lower display shows Utility Function (MIDI Chan,Base #,Mute Mode,etc)

Upper Display shows value/setting (0-16, 0-1, CUMULATIVE, etc).

Scroll Up/Dwn steps through the functions in the lower display,

upper display shows it’s current value.

To change a value/setting:

Press EDIT button- it lites up and now Up/Dwn scrolls through possible settings in upper display.

If applicable to the setting, the CLEAR or STORE sw lites up.

Once scrolled away from the current setting, the STORE button lites up.

User must press STORE to set new value,or press EDIT (lite goes off) and use the Up/Dwn to select another function in lower display.

Once STORE is pressed, the new value is set and EDIT goes off as above.

Up/Dwn now select next function.

To Exit- user presses UTILITY. It stops blinking and the Console returns to Operation Mode.

Utilities:

Function Name

Value (default is listed in first column)

(In Lower Display)

(In Upper Display)

MIDI Utilities

 

 

MIDI_CHAN

1

1-16

MIDI_BASE

BASE 1

BASE 0

MIDI_PCHNG

SEND

RECEIVEBOTH OFF

MIDI_MUTES

ON

OFF

MIDI_LOAD

DISABLED

ENABLED

MIDI_DUMP

PRESS_STOR

 

p. 58

Page 57 Page 59
Image 58
Page 57 Page 59
Contents V12 mixing console Direct output features Mono input moduleGroup assignment features Input features EQ features Aux features Aux send , 6, 7 Push-on/push-off switchAux send , 2, 3 Segment channel meter Monitor featuresSolo switch VCA-level LEDPage Stereo input module Dual level controlImage width control-WID Sum switchImage balance control Polarity-reverse switch Ground lift switchDual-concentric input gain control EQ features Aux features Aux send operation Dual 8-segment channel meter Page Mono-matrix features Group output module-matrix, aux, groupMute switch External-in signal-level to matrixIlluminated mute-switch Mute active-LEDTalkback preset-switch Insert on-switchPeak and signal-present LED Output level-control rotary potMtx master and GRP master LED indicators Aux master features AUX-master and GRP-master LED indicators Group-to-matrix on-switch Group-assignment featuresMatrix post-switch Mono-assignment switchGroup-master features Output level-control 100mm fader MTX switch recessed Module swap featuresMode switch recessed FOH group LEDGroup rear-panel connectors Vca masters Illuminated mute-switchesSolo switches 100mm fadersLeft/right/mono to matrix on-switch Output mute safe switchLeft, right and mono peak and signal-present Leds Matrix-post switchMute safe Input fader blockAct LED µ-mute Act LED VCAStereo-matrix features Stereo matrix / aux out moduleExternal-in left and right signal-level to matrix Stereo matrix output-level control Stereo matrix solo-switchMtx to aux Stereo matrix output-balance controlDual-aux output features Talkback preset-switch One odd channel, one even channel 100mm output fader One per odd channel, one per even channelSolo switch Oscillator features Master modules-M1, M2Meter-view features Meters-A/meters-B switch bankAlternate output features Provides an area to label the alternate outputs usage Talkback master features Link headphone/intercom switch Intercom interconnect featuresConsole-to-intercom level and switch Comms levelMonitor output features Dim On-switchSum 100mm fader level-controlLeft-/right-output switch Headphone output featuresLCR output-monitoring 100mm headphone level-control Solo system features Page Micro panel features Micro mute systemManual mute-bank select Channel fader features ButtonVCA LED on module Normal operation mode Micro operationSelect Scene to edit Edit/preview rapid recall Edit/ViewExiting Edit Mode Other ways to exit Edit ModeUtility Mode UtilitiesGeneral Controls Clear UtilitiesShow Control Micro UtilitiesGeneral Controls Scene Resettingthe Micro Page V12 rear views Page V12 rear views
Related manuals
Manual 24 pages 8.07 Kb

V12 specifications

The Peavey V12 is a remarkable guitar amplifier that has gained a reputation for its versatility, punchy sound, and reliability. Aimed at guitarists across various genres, the V12 combines advanced technologies with user-friendly features, making it an appealing option for both amateur and professional musicians.

One of the standout features of the Peavey V12 is its power and performance. This amplifier delivers an impressive 120 watts of power, ensuring that it can handle large gigs and rehearsals with ease. Its dual gain structure allows players to explore a wide range of tone options, offering both clean sounds and high-gain distortion. This adaptability makes the V12 suitable for everything from blues to rock and metal.

The V12 boasts Peavey's patented TransTube technology, which emulates the warm, dynamic sound of tube amplifiers. This innovative technology provides a rich tonal palette, delivering the best of both worlds – the warmth of analog sound with the reliability of solid-state performance. Furthermore, the amp comes equipped with a three-channel configuration, giving users access to clean, crunch, and lead sounds at the push of a button. This makes it easy to switch between settings during live performances.

In addition to its tonal options, the Peavey V12 offers comprehensive EQ controls, including treble, mid, and bass adjustments. This allows guitarists to fine-tune their sound to suit their specific preferences and playing styles. The presence and resonance controls further enhance tonal shaping, enabling players to achieve a robust sound that cuts through the mix.

Another notable characteristic of the V12 is its durable construction. Built with high-quality materials, this amp can withstand the rigors of touring, making it a reliable choice for musicians on the road. The lightweight design also adds to its ease of transport, ensuring that musicians can take their sound anywhere.

Additional features include built-in reverb, allowing users to add depth to their tone, and a headphone output for silent practice. The amp is also compatible with footswitching, which gives players added control during performances.

In conclusion, the Peavey V12 is an exceptional amplifier that blends power, versatility, and cutting-edge technology. With its extensive sound-shaping capabilities and robust construction, it stands out as an ideal choice for guitarists seeking quality and performance in one package. Whether for practice, recording, or live performances, the V12 is designed to meet the demands of contemporary musicians.
Top Page Image Contents