Peavey 3D Mix Pro manual 3D MIX PRO Specifications

Page 42

3D MIX PRO SPECIFICATIONS

THD:

<0.05% (20 Hz - 80 KHz BW)

FREQUENCY RESPONSE:

+0 dB /-1 dB, 20 Hz - 20 kHz

HUM AND NOISE: (22 Hz - 22 kHz BW)

<-110 EIN (mic)

<-90 dBu, all controls off, any output <-80 dBu nominal settings, gains minimum,

any output

CROSSTALK:

-60 dBu (1 kHz) left to right;

-70 dBu (1 kHz) channel to channel

STEREO CHANNEL EQ (+12 dB, -22dB):

HI: 10 kHz shelving

MID: 850 Hz peaking

LOW: 70 Hz shelving

MIC CHANNEL EQ (+15 dB, -15 dB): HI: 10 kHz shelving

LOW: 80 Hz shelving

LOW CUT FILTER: 18 dB/oct @ 75 Hz

RUMBLE FILTER:

18 dB/oct @ 40 Hz

MIN INPUT LEVELS FOR 0 dBu OUTPUT:

(All controls at maximum gain settings) MIC: -57 dBu (1.0 mv RMS); 2 k ohms LINE/CD: -23 dBu (55 mv RMS); 10 k ohms PHONO (@ 1KHz): -50 dBu (2 mv RMS); 47 k ohms

SRS CONTROLS:

Space, collapse switch, enable (with LED)

LOOP LEVEL:

0 dBu nominal

SIGNAL INDICATORS (LED):

Signal Present: Indicates the signal has exceeded the -20 dBu level. 12 Segment ladder indicates main output level (0 dB = 0 dBu)

PHANTOM POWER:

+15V, both mic inputs

POWER REQUIREMENTS:

15 W 115 VAC or 230 VAC (Export model)

is a registered trademark of SRS Labs, Inc.Ó

42

Image 42
Contents 3D Mix Pro Page Two Distinct Stereo Input Channels Features per channel Two Microphone Inputs Features per inputMaster mic features Master SectionBack Panel Power and Grounding Main OutputsInput Channels 1 Monitor OutputsEffects SEND/RETURN InputsCONTROLS/INDICATORS MIC Inputs and Controls Master SectionMono Level Booth LevelStereo Output Level Indicator Headphone Cue LevelEffects Effects Loop ControlsSpatial Expander Stereo Channel EQ +12 dB, -22dB 3D MIX PRO SpecificationsHUM and Noise 22 Hz 22 kHz BW MIN Input Levels for 0 dBu Output3D MIX PROª Block Digram 3D Mix Proª Hookup Diagram Important Safety Instructions P a „ O L Secci-n Maestra Master Poder Y Tierra Salidas Principales Main OutputsSalidas DE Monitor Entradas CONTROLES/INDICADORESFader de Canal Switch Indicador de Mute SilencioLED cue/cue Entradas Mic 1/MicPaneo Principal Der.-Izq LED de PoderNivel Principal Nivel de CabinaSelecci-n de Aud’fonos Salida de Aud’fonosFader-X Efectos Controles DE Loops DE EfectosExpansor Espacial SRS Especificaciones DE LA 3D MIX PRO Instrucciones DE Seguridad Importantes Deux canaux stŽrŽos indŽpendants Deux entrŽes stŽrŽos Deux entrŽes microContrles micros Prise dÕalimentation IEC Alimentation ET Mise Ë LA MasseSection Master Interrupteur dÕalimentationSorties Principales Sorties MonitorEntrees SEND/RETURN EffetsCanaux Dõentree 1 ET CONTROLES/INDICATEURSEntrees ET Controles DES Micros Section MasterMain Pan Droite/Gauche Niveau Booth33. SŽlecteur de mode Žcouteurs Niveau MonoEffets Expandeur SpatialCrossfader Contrle Space SRS Conservez CES Instructions Eigenschaften Zwei Stereo KanŠle Eigenschaften pro KanalZwei MikrofoneingŠnge Eigenschaften pro Eingang Master Sektion Strom UND ErdungFŸr beide EingŠnge gemeinsam 2 Band EQ KaltgerŠteanschlu§Main Stereo Outputs L und R, symetrisch Booth Outputs L und RHz Rumble Schalter Main Chinch Outputs L und R, asymetrischDIE Anzeigen UND Regler Signal LEDInput KAN€LE 1 UND 11. CD/Line InputMic Signal Level / LED MIC Input UND RegelungMute Schalter / LED Stereo Output Level Meter Effekte Effects Loop3D MIX PRO Specifications Wichtige Sicherheitsrichtlinien Page Page Page Peavey Electronics Corporation Limited Warranty 80304491