(20)REMOTE SWITCH CONNECTOR
This
(21)HEADPHONE JACK
This 1/4" stereo (TRS) connector accepts standard stereo headphones. Using this jack interrupts the signal to the speaker, making it ideal for quiet practice situations.
(22)EFFECTS LOOP
These 1/4" mono (TS) jacks allow signal to be sent to and returned from external effects processors. Using shielded cables, patch from SEND to the input of the external device, and from the output of the device to RETURN. Only devices that do not increase signal gain should be used in this loop.
(23)GROUND POLARITY SWITCH
This
NOTE: This feature only provided on 120 Volt models.
(24)EXTERNAL SPEAKER JACK
This 1/4" mono (TS) jack allows the connection of an external speaker cabinet(s). It is wired in parallel with the internal speakers. External enclosures must be capable of handling 100 Watts and have a minimum impedance of 8 Ohms.
(25)POWER AMP IN
This 1/4" jack allows the connection of line level signals directly to the power amp.
(26)PREAMP OUT
This 1/4" jack allows patching to mixing consoles, tape recorders, etc. Use a shielded cable to patch from this jack to the input of the device receiving the signal. This patch does not affect the operation of the amplifier or the signal continuing to the power amp and speakers.
(27)EFFECTS LEVEL
This switch selects the EFFECTS LOOP (22) sensitivity to avoid overdriving effects with no input level control.
7