Fostex MR-8 UNDO/REDO /Y Z 9 entry key, Time Base Select / V W X 8 entry key, Transport keys

Page 13

MR-8 Owner’s Manual

25. [UNDO/REDO] /Y Z 9 entry key

Used to undo or redo recording or editing (see page 32 and 34). Each press of the key alternates "undo" and "redo". In the menu mode, this key is used for character entry of Y (y), Z (z) and 9 (see page 21).

26.[TIME BASE SELECT] / V W X 8 entry key

Selects the time base shown on the LCD display (see page 27). Pressing this key while holding down the [MENU] and [ENTER] keys together resets the LCD display contrast to the default value (see page 28). In the menu mode, this key is used for character entry of V (v), W (w), X (x) and 8 (see page 21).

27.Transport keys

[PLAY] key

Starts playback of the recorder.

Pressing this key while holding down the [RECORD] key starts recording of the armed (record-ready) track(s). Pressing this key dur- ing recording releases recording.

[STOP] key

Stops the recorder.

By pressing the [PLAY], [REWIND] or [F FWD] key while holding down the [STOP] key, you can lo- cate to a specific point or repeat playback as be- low.

• [STOP] + [PLAY] (A-B PLAY)

Repeats playback between the LOCATE A and LOCATE B points (see page 49).

[STOP] + [REWIND] (LOCATE ABS ZERO)

Locates to the beginning (ABS ZERO) of the current song (see page 52).

[STOP] + [F FWD] (LOCATE REC END)

Locates to the recording end of the current song (REC END) (see page 52).

[RECORD] key

Pressing the [PLAY] key while holding down the [RECORD] key starts recording of the armed (record-ready) track(s) (see page 32 and 34).

By pressing only the [RECORD] key when any track(s) is armed (in record-ready), the input signal(s) of the armed track(s) can be monitored (i.e. input monitor mode).

[F FWD] key

Pressing this key fast forwards the recorder. During playback, pressing this key starts 3 x cue- ing. While holding down the [STOP] key, press- ing this key locates to the recording end of the current song (REC END) (see page 52).

While holding down the [ENTER] key, pressing this key selects a song (see page 24).

[REWIND] key

Pressing this key rewinds the recorder.

During playback, pressing this key starts 3 x re- verse cueing. While holding down the [STOP] key, pressing this key locates to the beginning (ABS ZERO) of the current song (see page 52). While holding down the [ENTER] key, pressing this key selects a song (see page 24).

28.[COUNTER 0 RETURN] / S T U 7 entry key

Locates to the counter zero point (see page 53). In the menu mode, this key is used for character entry of S (s), T (t), U (u) and 7 (see page 21).

29.[COUNTER RESET] / P Q R 6 entry key

Resets the counter to zero (see page 52). In the menu mode, this key is used for character entry of P (p), Q (q), R (r) and 6 (see page 21).

30.[AUTO PUNCH] / M N O 5 entry key

Turns on or off the auto punch mode (see page 36). In the menu mode, this key is used for char- acter entry of M (m), N (n), O (o) and 5 (see page 21).

31.[LOCATE B/OUT] / G H I 3 entry key

Pressing the [STORE] key followed by this key stores the LOCATE B (or punch out) point (see page 36 and 53). In the menu mode, this key is used for character entry of G (g), H (h), I (i) and

3(see page 21).

32.[LOCATE A/IN] / D E F 2 entry key

Pressing the [STORE] key followed by this key stores the LOCATE A (or punch in) point (see page 36 and 53). In the menu mode, this key is used for character entry of D (d), E (e), F (f) and 2 (see page 21).

33. [PLAY MODE] / A B C 1 entry key

Selects the play mode from among normal, auto play, auto return and loop (see page 50).

In the menu mode, this key is used forcharac- ter entry of A (a), B (b), C (c) and 1 (see page 21).

13

Image 13
Contents 8588 018 100 Digital MultitrackerSafety Instructions Table of Contents 101 100Introduction MR-8 Main features About power supplyAbout copyrights Precautions upon handling the MR-8About damages Basics of the MR Song modeRecording method About songABS time Time baseBar/Beat/Clk Time counterInput monitor and repro monitor Remain displayTrim control Input B connectors Input a connectorsNames and Functions Top panel left partPhones jacks 1 REVERB/DELAY Time controlPhones VOL control Effect keysTop panel right part Play Mode / a B C 1 entry key Counter Reset / P Q R 6 entry keyUNDO/REDO /Y Z 9 entry key Time Base Select / V W X 8 entry keyRear panel Side panel Battery compartmentBottom panel Card slot Midi OUT jackHow to insert a CompactFlashTM card How to remove a CompactFlashTM cardAbout recording medium Connecting the AC adaptor About the powerInserting batteries Turning on the unitTurning off the power Low battery displayTurning on the LCD display backlight Tips Listening to the demo song again Listening the demo songPreparation of a CompactFlashTM car d Press the Menu key to enter the menu modeWhile S01 Fostexfever is highlighted, press the Enter key Character entry keys How to enter charactersEntry example Turn on the MR-8 power Press the Menu key to quit the menu modePreparation for recording onto a new card Correction and deletionCreating a song/selecting a song Select the song mode using the Cursor or Cursor keyCreating a song While Select Song is highlighted, press the Enter keyTip Selecting a desired songWhile System is highlighted, press the Enter key Formatting a cardWhile Card Format is highlighted, press the Enter key Press the Enter keyModel AD-12A ConnectionsHome screen DisplaySelecting a time base Adjusting the display contrastMenu screen Recording onto a mono track MR -8 recording basicsRecording onto stereo track Distortion setting Input level settingAbout simulation effect Insert effectsPreparation for recording Recording onto a single trackUndo/redo Playing back the recorded trackStarting recording Recording onto two tracks Set the Input a Select switch to MIC/LINEPreparation for recording Press the REC Select key for track 5/6Playing back the recorded tracks Starting recordingPunch in/out using the footswitch Punch in/out using the keys on the top panelPunch in/out How to make auto punch in/out mode active Setting the punch-in and punch-out pointsAuto punch in/out RehearsalAbout part Actual auto punch in/outPress the Play key to start playback of the song Locate the recorder to the point before the punch- in pointUsing the insert effects for recording Using effectsMic simulation effects Amp simulation effectsUsing the reverb or delay Selecting a delay typeSelecting an effect type Details of each effect typeAdjusting the effect send levels Adjusting the delay/reverb timeSignal flow from a track to the effector Selecting the desired effect type Using the mastering effectsDetails about each mastering effect type Example of track bouncing Bouncing tracksSelecting the bounce mode Signal flow of track bouncing7/8 mode 5/6 modeRehearsal of track bounce Actual track bounce Checking the bounced signals on trackPanning control Auto punch in/out of track bouncingThrough 4 for recording Exporting bounced data to a personal computerAnalog mixdown MixdownDigital mixdown Use the Master fader of the MR-8 to adjust the output levelAfter finishing recording, stop both recorders Tip Basic playback Playback functionsPlayback cueing Playback between Locate a and B pointsAuto play mode Selecting a play modeAuto return mode Loop modeLoop function in auto punch in/out mode Locate functions Resetting the counterLocate ABS Zero function Locate REC END functionStoring a locate point Locating to counter zeroStoring a Locate a point Locating to the Locate a or Locate B pointLocating Storing a Locate B pointHow to set the pre-roll/post-roll time Setting the pre-roll/post- rollWhen System is highlighted, press the Enter key After selecting the pre-roll time, press the Enter keyHow to set the beat resolution Setting the beat resolutionBar / 1 / 46 clk 1 bar / 1 / 00 clk Bar / 4 / 51 clk 3 bar / 1 / 00 clkEditing a song Press the Menu key to exit the menu modeCreating a new song Selecting a desired songAfter entering the name, move the cursor to Editing a song nameKey, then press the Enter key Deleting an unnecessary song Tips Protecting a songUse the Cursor / keys to select On, and press the Enter key Deleting the unnecessary file in a song Undo/redo of track editing Track editingWhile Erase Track is highlighted, press the Enter key Copying/pasting whole track data Press the Enter key Use the Cursor / keys to select source tracks to be moved Moving whole track dataExchange whole track data Flashing Part editing Erasing a desired part Use the Cursor / keys to select the tracks Copying to the clipboardUse the Cursor / keys to select the desired tracks Pasting clipboard dataWhile Paste Part is highlighted, press the Enter key Then press the Enter key Moving the desired part to the other tracks Use the Cursor / keys to select the move source tracks Use the Cursor / keys to select the exchange source tracks Exchange parts between tracksPress the Enter key Settings of the MR-8 and Midi sequencer Midi sync/MTC frame rate settingsSynchronization using MTC Synchronizing with MidiSynchronization using Midi clock Setting the signature map Using the rhythm guide functionCreating the signature/tempo map Changing the bar number or signature Use the Cursor key to flash 4/4 for Sig. settingUse the Cursor / keys to enter Use the Cursor / keys to enter 3/4Changing the bar offset Deleting an unnecessary bar/signature settingTo exit the menu mode, press the Menu key First beat in bar 120 Creating the tempo map180 Third beat in bar First beat in bar 120Use the Cursor key to flash 120 for Tempo setting Use the Cursor key to flash 1 for Beat settingEditing the tempo map Deleting an unnecessary tempo settingUse the Cursor / keys to enter a desired tempo value Setting the click level WAV file conversion Procedure of file conversionEnabling the file conversion Editing a file name Connection to a personal computer Xporting data to a personal computerImportant note Exporting a WAV file to a personal computerPress the Menu key to exit the menu mode Tip Initializing the MR Initialized item Default settingTroubles for recording TroubleshootingTrouble Is the Record key flashing and does Light on the display?Is the track fader for the playback track brought up? Troubles for playbackIs shown on the screen? Are the punch-in and punch-out points set correctly?Troubles for effect Troubles for power supplyOther troubles Pin assignment of XLR connectors MR- 8 specificationsInputs/Outputs Record/playbackBlock diagram Physical dimensionsWhen using the normal mode When using the bounce mode 1-6 7/8 mode When using the bounce mode 1-4 5/6 modeModel MR-8 Midi Implementation Chart100 IndexStereo Headphone Foot switch Personal Monitor Optional accessariesRP Stereo Headphone Optical Cable Powered near field studio MonitorDeclaration of EC Directive 376785