Fostex MR-8 owner manual Use the Cursor / keys to select the move source tracks

MR-8 Owner’s Manual

5)Use the [CURSOR ] key to highlight "Move Part", then press the [ENTER] key.

The display now shows the screen for selecting the source track(s) and destination track(s) of the move operation. "Source Track" selects the move source track(s), while "Dest. Track" selects the move destination track(s).

flashing

6)Use the [CURSOR /] keys to select the move source track(s).

You can select from among mono tracks (1 through 8) and stereo pair tracks (1/2, 3/4, 5/6 and 7/8).

10) Press the [ENTER] key.

The display returns show to the screen in which "Move Part" is highlighted.

7)Use the [CURSOR ] key to move the cursor to the option for "Dest.Track".

8)Use the [CURSOR /] keys to select the move destination track(s).

If you select a mono track for the move source in step 6 above, you can select a mono destination track. If you select stereo pair tracks for the move source in step 6 above, you can select stereo pair destination tracks.

<Note>

You cannot select the same track(s) for the move source and destination.

9)Use the [CURSOR ] key to move the cursor to "ENTER" at the lower right on the screen, then press the [ENTER] key.

The display shows "Please Wait!", immediately fol- lowed by "Completed!" when the MR-8 completes the move operation.

To cancel the move operation, move the cursor to "[CANCEL]" at the lower left on the screen, then press the [ENTER] key.

11) Press the [MENU] key to exit the menu mode.

<Note>

If you are not satisfied with the result, press the [UNDO/REDO] key to undo the opera- tion (see page 68).

74