Editing the front panel assignments
6.Select the transition effect.
Use the cursor buttons to select the type of transition effect. With an effect selected (blinking) and the video fader set in the center position, the output screen will show the type of transition effect that is selected. Operate the video fader to see the result.
7.Return to the previous screen.
When you have selected an effect, press the menu button to return to the previous screen. Press the button twice to exit the menu screen and return to the previous screen.
Changing the assignment of the wipe button (WIPE)
With the factory settings, eight basic wipes are assigned to this button for the eight settings of the memory dial. Here’s how to assign a different type of transition effect to the wipe button.
1.Set the memory dial to the number whose assignment you want to change.
Operate the video fader while you turn the memory dial to different positions. Notice how the dial selects different wipe patterns. Set the memory dial to the number (2 through 8) whose settings you want to change.
2.Press the wipe button (WIPE)
The button lights up when pressed.
3.Press the menu button (MENU).
Press the menu button (MENU) located in the upper left of the panel. The settings edit menu will appear on the TV screen connected to the preview output.
4.Select “WIPE.”
Use the cursor buttons to select “WIPE.” It will blink when you select it. The memory dial number you select is displayed following “WIPE (Trans1).” If you have selected memory number 2, this will indicate [Mem2].
43