Editing the front panel assignments
5.Select “MODE” or “SPEED.”
Use the cursor buttons to choose whether it is the mode or the speed of the transition that you want to change. Choose “MODE” if you want to change the transition from a “cut” to one that incorporates some kind of effect, such as “wipe.” Choose “SPEED” if you want to change the speed of the transition. Then press the enter button to proceed to the following setting screen.
6.Select the operating mode or speed.
If you are changing the operating mode, use the cursor buttons to change “Transition A/B” to
“Direct A/B.” If you are changing the speed, select either “BPM x 1/4,” “BPM x 1/2,” “BPM x 1,” or “BPM x 2.”
7.Return to the previous screen.
When you have finished making settings, press the menu button to return to the previous screen. Press the button three times to exit the menu screen and return to the previous screen.
Changing the assignment of the channel A/channel B transformer buttons (TRANSFORMER)
With the factory settings, and when the memory dial is set to 1, the switch to image A or B takes place immediately when you press the channel A or B transformer buttons (TRANSFORMER).
1.Press the transformer buttons while turning the memory dial.
Press the transformer buttons while turning the memory dial to various settings, and choose the memory number whose assignments you want to change.
2.Press the menu button (MENU).
Press the menu button (MENU) located in the upper left of the panel. The settings edit menu will appear on the TV screen connected to the preview output.
51