Changing the video fader orientation
Changing the video fader orientation
The
1.Remove the screws.
Four screws fasten the video fader. Remove these four screws from the round video fader mounting plate, being careful not to lose them.
2.Reposition the video fader.
Turn the video fader 90 degrees. Align the triangle printed on the round mounting plate of the video fader with the triangle printed on the panel of the
3.Fasten the screws.
Fasten the video fader to the panel, using the screws that you removed earlier. Firmly tighten all four screws.
The cable that connects the video fader to the
72