Edirol V-4 owner manual Front Panel

Page 14

Before you begin

2.DC in connector

Connect the power cable (DC) from the AC adaptor to this connector.

3.Power cable hook

Use this hook to retain the power cable so that it will not be accidentally unplugged.

4.MIDI OUT connector (MIDI OUT)

MIDI messages input from an external device are output without change (“thru-ed”) from this connector. When using V-LINK to control both the V-4 and a DV-7PR, connect this output to the input of the DV-7PR.

5.MIDI IN connector (MIDI IN)

Use this connector to input control signals sent from an external device to the V-4.

6.S-video output jack (S-VIDEO OUTPUT) This jack outputs a S-video signal.

7.S-video input jacks (S-VIDEO INPUT) These jacks input S-video signals.

Front Panel

8.Video (composite) input jacks (INPUT)

These jacks input video (composite) signals. If both video (composite) and S-video signals are input simultaneously to the same channel (channel 1 or 2 only), the S-video signal will take priority, and the video (composite) signal will be ignored.

9.Preview select buttons (PREVIEW OUT SELECT) (see p. 20)

These buttons select the image that will be output to the preview monitor. You can select one of the input signals of channels 1 through 4, or the mixed output signal.

10.Preview output jack (PREVIEW OUT)

This jack outputs the preview monitor signal. Simultaneously, MIDI and effect parameters are also output to the preview monitor.

11.Video (composite) output jacks (OUTPUT)

These jacks output video (composite) signals. In conjunction with the S-video output jack, these jacks let you simultaneously output to three TV monitors or projectors.

12.Parameter setting buttons

These buttons are used to set various parameters for each button. The parameters are displayed on the TV monitor connected to the preview output jack.

13.BPM indicator (see p. 39)

This displays the current BPM (Beats Per Minute) setting. You can turn the dial below to change the displayed setting.

14.Tap button (TAP) (see p. 39)

This button is used to control BPM. The speed at which this button is tapped affects the BPM setting.

14

Image 14

Contents Page Avis Page Page Maintenance Power SupplyPlacement Additional PrecautionsOther important notes About turning the power onAbout specifications Contents Midi implementation Index Welcome Features What is V-LINK? LinkBefore you begin Check the included itemsNames of things and what they do Rear PanelFront Panel Before you begin About Ground Terminal Unsuitable places for connectionConnecting peripheral devices Typical connection exampleVideo signal flow Turning the power off Turning the power on/offTurning the power on Checking the output to the preview monitor Checking the inputs and outputsChecking the final output About the display on preview monitor Conceptual diagram of the Memory dial About the Memory dial MemorySwitching two images Switching by CutSwitching with dissolve Switching with WipeUsing fade-to-white or fade-to-black Using Picture In Picture to composite images Compositing two imagesUsing Chroma Key to composite images Using Luminance Key to composite images Compositing two images Compositing two images Changing the color of the image Applying the Negative effectApplying the Colorize effect Changing the color of the image Changing the motion of the image Applying strobe motionApplying the Multi or Mirror effects Applying the Multi effectApplying the Mirror effect Using the tap TAP function to switch images Switching in synchronization with musicUsing BPM sync to switch images Switching in synchronization with music Applying an effect on the music Using BPM sync to apply an effectUsing the tap TAP function to apply an effect Editing the front panel assignments Enter Button EnterEditing the front panel assignments Changing the assignment of the mix button MIX Changing the assignment of the wipe button Wipe Changing the assignment of the EFX button EFX Editing the front panel assignments Changing the assignment of the output fade dial Output FadeEditing the front panel assignments Editing the front panel assignments Editing the front panel assignments Changing the assignment of the BPM sync button BPM Sync Editing the front panel assignments Editing the front panel assignments Protecting the memory Copying or exchanging memories Recalling the factory settings Editing the front panel assignments Using V-LINK to control Control the V-4 from an external deviceUsing Midi to control Using V-LINKDV-7PR Midi settings Setting the Midi receive channel Midi Rx Channel Making other Midi settings Midi Setup Making various settings Making various settings Calibrating the video fader Calibrating the video fader Using the V-4 in Presentation mode What is Presentation mode?Switching to Presentation mode Presentations using two screens with Picture In PictureUsing the V-4 in Presentation mode Switching between Ntsc and PAL Changing the video fader orientation Changing the video fader orientation Troubleshooting Operating the video fader does not switch the imageMenu List Menu List255 Effects-A Mem2-8 Efx1 Efx2 Efx3 Efx4 Effects-B Output Fade Mem2-8 BPM Sync Mem 2-8 Mode Midi Setup Midi Tx Channel Utility Mode Preview Auto Speed Main specifications Video inputMain specifications Dimensions Examples of using Using the V-4 at an eventUsing the V-4 at a concert or VJ performance DV-7PRUsing the V-4 at a presentation DVDVideo output Preview Midi control Projector Midi implementation Midi messages received at MidiMidi implementation Midi messages transmitted from Midi OUT Midi implementation Midi Implementation Parameter Address Map Clip Control Preference Appendices Factory Setting of V-LINK Midi Implementation Chart Index PALInformation 03019190 ’03-01-C2-11KS