Edirol V-4 owner manual Switching with dissolve, Switching with Wipe

Page 24

Switching two images

5.Release the transformer button (TRANSFORMER)

Release your finger from the transformer button you pressed. Notice that the image displayed on your TV monitor (or projector) has returned to the previous image.

Switching with dissolve

“Dissolve” is the effect of switching images using a gradual fade. You can create this effect by mixing two images. If you stop mid-way during this change (i.e., with the video fader in the center position), you will see a double-exposure of images A and B.

1.Set the memory dial (MEMORY) to 1.

Turn the dial all the way to the left to select the 1 position.

2.Select the input images for A and B.

From inputs 1 through 4, select the images that will be input to channel A and channel B. If the same image is being input to both A and B channels, you will not notice any change when you switch between channels. For example, if you have selected input image 1 for channel A, you should choose from images 2 through 4 for channel B.

3.Press the mix button (MIX).

Press the mix button (MIX) located above the video fader. The button will light.

4.Move the video fader.

Move the video fader. On your TV monitor (or projector), notice how images A and B are mixed while the change occurs.

Switching with Wipe

“Wipe” is the effect of switching between images by “wiping away” the previous image. If you stop midway during this change (i.e., with the video fader in the center position), the two images will both be partially displayed.

1.Set the memory dial (MEMORY) to 1.

Turn the dial all the way to the left to select the 1 position.

24

Image 24

Contents Page Avis Page Page Power Supply PlacementMaintenance Additional PrecautionsAbout turning the power on About specificationsOther important notes Contents Midi implementation Index Welcome Features What is V-LINK? LinkBefore you begin Check the included itemsNames of things and what they do Rear PanelFront Panel Before you begin About Ground Terminal Unsuitable places for connectionConnecting peripheral devices Typical connection exampleVideo signal flow Turning the power on/off Turning the power onTurning the power off Checking the inputs and outputs Checking the final outputChecking the output to the preview monitor About the display on preview monitor Conceptual diagram of the Memory dial About the Memory dial MemorySwitching two images Switching by CutSwitching with dissolve Switching with WipeUsing fade-to-white or fade-to-black Using Picture In Picture to composite images Compositing two imagesUsing Chroma Key to composite images Using Luminance Key to composite images Compositing two images Compositing two images Changing the color of the image Applying the Negative effectApplying the Colorize effect Changing the color of the image Changing the motion of the image Applying strobe motionApplying the Multi or Mirror effects Applying the Multi effectApplying the Mirror effect Switching in synchronization with music Using BPM sync to switch imagesUsing the tap TAP function to switch images Switching in synchronization with music Using BPM sync to apply an effect Using the tap TAP function to apply an effectApplying an effect on the music Editing the front panel assignments Enter Button EnterEditing the front panel assignments Changing the assignment of the mix button MIX Changing the assignment of the wipe button Wipe Changing the assignment of the EFX button EFX Editing the front panel assignments Changing the assignment of the output fade dial Output FadeEditing the front panel assignments Editing the front panel assignments Editing the front panel assignments Changing the assignment of the BPM sync button BPM Sync Editing the front panel assignments Editing the front panel assignments Protecting the memory Copying or exchanging memories Recalling the factory settings Editing the front panel assignments Using V-LINK to control Control the V-4 from an external deviceUsing Midi to control Using V-LINKDV-7PR Midi settings Setting the Midi receive channel Midi Rx Channel Making other Midi settings Midi Setup Making various settings Making various settings Calibrating the video fader Calibrating the video fader Using the V-4 in Presentation mode What is Presentation mode?Switching to Presentation mode Presentations using two screens with Picture In PictureUsing the V-4 in Presentation mode Switching between Ntsc and PAL Changing the video fader orientation Changing the video fader orientation Troubleshooting Operating the video fader does not switch the imageMenu List Menu List255 Effects-A Mem2-8 Efx1 Efx2 Efx3 Efx4 Effects-B Output Fade Mem2-8 BPM Sync Mem 2-8 Mode Midi Setup Midi Tx Channel Utility Mode Preview Auto Speed Main specifications Video inputMain specifications Dimensions Examples of using Using the V-4 at an eventUsing the V-4 at a concert or VJ performance DV-7PRUsing the V-4 at a presentation DVDVideo output Preview Midi control Projector Midi implementation Midi messages received at MidiMidi implementation Midi messages transmitted from Midi OUT Midi implementation Midi Implementation Parameter Address Map Clip Control Preference Appendices Factory Setting of V-LINK Midi Implementation Chart Index PALInformation 03019190 ’03-01-C2-11KS