Editing the front panel assignments
If you select an effect with the “*” mark after the effect name, the effect value can be changed with the control dial.
8.Return to the previous screen.
When you have made your selection, press the menu button to return to the previous screen. Press the button three times to exit the menu screen and return to the previous screen.
Changing the assignment of the BPM sync button (BPM SYNC)
With the factory settings, and when the memory dial is set to 1, BPM sync is set to switch between A and B by using a transition effect. The transition speed will be the BPM shown in the BPM indicator.
1.Turn the memory dial.
Select the memory number (2 through 8) whose assignments you want to change.
2.Press the menu button (MENU).
Press the menu button (MENU) located in the upper left of the panel. The settings edit menu will appear on the TV screen connected to the preview output.
3.Select “BPM/SYNC.”
Use the cursor buttons to select “BPM/SYNC.” The memory dial number you select is displayed following “BPM/SYNC.” If you have selected memory number 2, this will indicate [Mem2].
4.Press the enter button (ENTER)
Press the enter button to proceed to the setting screen.
50