16Common TOPS VSN log messages (0201)
Description: The sending PRU could not communicate with the receiving PRU. The latter did not accept the message. It is the responsibility of the sending PRU to recover from the error by resending the message or to declare itself faulty.
Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, document the problem, restart both sending and receiving PRUs, and then contact NT.
0002/0016 Message: [Sending_PRU_name] was trying to communicate with [Receiving_ PRU_name] but could not. The sender [Sending_PRU_ name] could not transmit to the network.
Description: The sending PRU could not communicate with the receiving PRU. It is the responsibility of the sending PRU to recover from the error by resending the message or to declare itself faulty.
Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, restart the sending PRU. If the problem persists, then reboot the entire machine. Document the problem, record all action taken, and then contact NT.
0002/0017 Message: [Sending_PRU_name] was trying to communicate with [Receiving_ PRU_name] but could not. The sender [Sending_PRU_ name] encountered a stack overflow.
Description: The sending PRU could not communicate with the receiving PRU. It is the responsibility of the sending PRU to recover from the error by resending the message or to declare itself faulty.
Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, then restart the sending PRU. If the problem persists, then reboot the SRU in which the PRU resides. Document the problem, record all action taken, and then contact NT.
0002/0018 Message: [Sending_PRU_name] was trying to communicate with [Receiving_ PRU_name] but could not. The information being passed within the communication packet is invalid.
Description: The sending PRU could not communicate with the receiving PRU. It is the responsibility of the sending PRU to recover from the error by resending the message or to declare itself faulty.
Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, document the problem, restart both sending and receiving PRUs, and then contact NT.
0002/0019 Message: [Sending_PRU_name] was trying to communicate with [Receiving_ PRU_name] but could not. The entry definition in [Receiving_PRU_name] does not match what [Sending_PRU_ name] expects. User action is required.
Description: The sending PRU could not communicate with the receiving PRU because the software version in each were not the same.
Action: The user must reinstall both PRUs from the load tape. If the problem persists, then contact NT.