54 ACPE Resource Manager Log Messages (9440)
Action: No action.
0000/000C Message: SET entry invoked - Changing the load on an ACPE. The ACPE was: [PRU_name] [PRU_number].
Description: The ACPE load has been set manually. This value is reset by the next interaction with the ACPE.
Action: No action.
0000/000F Message: SET entry invoked - The ObjectID passed is not supported. Object
Type was: [object_type]. Object Index was: [object_index].
Description: The object is not curently supported.
Action: No action.
0000/0010 Message: SET entry invoked - Set on "call" failed. Call reference did not match an active call.
Description: The "set" did not operate properly. Invalid data was sent.
Action: No action.
0000/0011 Message: SET entry invoked - Set on
Description: The "set" did not operate properly. Invalid data was sent.
Action: No action.
0000/0012 Message: SET entry invoked - Set on "setting load" failed. PRU number did not match an active ACPE.
Description: The "set" did not operate properly. Invalid data was sent.
Action: No action
0000/0013 Message: SET entry invoked - Set on "setting load" failed. The load value must be between 0 ..100.
Description: The "set" did not operate properly. Invalid data was sent.
Action: No action.
0000/0014 Message: SET entry invoked - Set on "algorithm selection" failed. PRU number did not match an active ACPE.
Description: The "set" did not operate properly. Invalid data was sent.
Action: No action.
0000/0015 Message: SET entry invoked making an ACPE ACTIVE. The ACPE made active was :[PRU_NAME], <ACPE_location>
Description: This log indicates that an ACPE has been manually set to active.
Action: No action required.
0000/0027 Message: <PRU_name> (Tokenizer) Disk status over threshold. Stopping collection.
Description: Sample data collected is not written to disk because it is full. The daily audit cleans the disk of sample data, at which time sample data is written to disk again. Call processing continues as usual and no effect to service is seen.
Action: No action.