Nortel Networks VSN04 manual Voice interface resource manager log messages

49

9.Voice interface resource manager log messages - 0220

0000/0000	Message: Error encountered attempting to load DTMF patterns. The symbol
	[symbol] is referenced in the table [table_name] but not found in the table
	[table_name].
	Description: Applications can not access the VIs because of a reference
	error in an SDM table. This table can not be accessed by the user.
	Action: Contact NT to correct the problem.
0000/0001	Message: Error encountered attempting to load DTMF patterns.
	Description: Applications can not access the VIs because of a reference
	error in an SDM table. This table can not be accessed by the user.
	Action: Contact NT to correct the problem.
0000/0002	Message: VIRM has been unable to load DTMF patterns. The specific
	problem encountered is described in another log.
Major	Description: The Voice Interface Resource Manager could not load an SDM
	table. Either the previous, but usually the log immediately following this one,
	identifies the specific problem.
	Action: The problem identified in the qualifying log must be corrected.
	When corrected, the VIRM must be reload. The alarm clears once this is done.
0000/0003	Message: Any outstanding alarms generated by the VIRM have been cleared.
	Description: This log is generated every time the VIRM PRU is brought into
	service. There may not be any outstanding alarms when the VIRM is brought
	into service.

Action: No action.

TOPS VSN Log and alarm messages