Common Tops log messages (020A) | DNC Logs 43 |
0001/0021 Message: [PRU_name] was attempting to perform an SDM "Set Atomic Commit" and failed. Error Type = [Helix_IO_result], Error Class = [1,2,3]. [Two 80 character lines of optional data.]
Description: The PRU tries to set the atomic commit for a Service Data
Manager operation and fails. Class error codes are: 1) run error, 2) task error, and 3) IO error.
Action: This log should never occur. If it does, contact NT immediately.
0001/0022 Message: [PRU_name] was attempting to perform an SDM "Add table TransID" and failed. table Name = [SDM_table] Access Mode = [read only/read- write]. Error Type = [Helix_IO_result], Error Class = [1,2,3]. [Two 80 character lines of optional data.]
Description: When the PRU tries to add a table to the Service Data Manager,
it fails. Class error codes are: 1) run error, 2) task error, and 3) IO error. The error may be caused by a full internal array or a duplication in table names.
Action: Record all information for NT.
0001/0023 Message: [PRU_name] was attempting to perform an SDM "Set TNUM TransID" and failed. Error Type = [Helix_IO_result], Error Class = [1,2,3]. [Two 80 character lines of optional data.]
Description: The PRU tries to set TNUM transID for a Service Data Manager
operation and fails. Class error codes are: 1) run error, 2) task error, and 3) IO error.
Action: This log should never occur. If it does, contact NT immediately.
0001/0024 Message: [PRU_name] was attempting to perform an SDM "Get TNUM TransID" and failed. Error Type = [Helix_IO_result], Error Class = [1,2,3]. [Two 80 character lines of optional data.]
Description: The PRU tries to get a TNUM transID for a Service Data Manager
operation and fails. Class error codes are: 1) run error, 2) task error, and 3) IO error.
Action: This log should never occur. If it does, contact NT immediately.
0001/0025 Message: [PRU_name] was attempting to perform an SDM "Init TransID" and failed. table Name = [SDM_table] Access Mode = [read
Description: The PRU tries to initialize transID for a Service Data Manager
operation and fails. Class error codes are: 1) run error, 2) task error, and 3) IO error.
Action: This log should never occur. If it does, contact NT immediately.
0001/0026 Message: [PRU_name] was attempting to perform an SDM "Start Transaction" and failed. Error Type = [Helix_IO_result], Error Class = [1,2,3]. [Two 80 character lines of optional data.]