Common Tops log messages (0202) | DNC Logs 21 |
0003/002A Message: [PRU_name] received an IO error on path [file/directory_path name]. The error was the result of trying to save the file to disk, but the file was not opened for "writable" access.
Description: The PRU encountered an error during an IO operation such as, open, read, or write, on the file or directory. The operation was not performed because it did not make its way to the server. The error is in the SRU where the PRU resides. It is the responsibility of the PRU performing the operation to recover from the error and to retry the operation. If it is unable to do so, then it can declare itself faulty.
Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, then reboot the PRU. If the problem persists, then reboot the server which handles the IO operation. If neither reboot operations are successful, then reboot the whole system. Document the problem, the corrective action taken, and then contact NT.
0003/002B Message: [PRU_name] received an IO error on path [file/directory_path name]. The error was the result of performing an illegal seek operation.
Description: The PRU encountered an error during an IO operation such as, open, read or write, on the file or directory. The operation was not performed because it did not make its way to the server. The error is in the SRU where the PRU resides. It is the responsibility of the PRU performing the operation to recover from the error and to retry the operation. If it is unable to do so, then it can declare itself faulty.
Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, then reboot the PRU. If the problem persists, then reboot the server which handles the IO operation. If neither reboot operations are successful, then reboot the whole system. Document the problem, record all action taken, and then contact NT.
0003/002C Message: [PRU_name] received an IO error on path [file/directory_path name]. The error was the result of performing an operation on a file set using a bad identifier for the file set.
Description: The PRU encountered an error during an IO operation on the file or directory. The operation was not performed because it did not make its way to the server. This error is in the SRU where the PRU resides. It is the responsibility of the PRU performing the operation to recover from the error and to retry the operation. If it is unable to do so, then it can declare itself faulty.
Action: If the PRU is in the working state, no action is required. If the PRU is in the faulty state, then reboot the PRU. If the problem persists, then reboot the server which handles the IO operation. If neither reboot operations are successful, then reboot the whole system. Document the problem, record all action taken, and then contact NT.
0003/002D Message: [PRU_name] received an IO error on path [file/directory_path name]. The error was the result of performing an I/O operation, but the server that was referenced [first_component_of_pathname], was not found.