64 Application Call Processing Engine Log Messages (9442)
Description: The ACPE could not determine the locality treatment for the current call because the Locality Database is either a new set of locality prompts, or a new set of locality prompts is being saved. This call will be handled according to the datafill of parameters Locality_Check and Loc_Default_Prompt in table User Interaction.
Action: No immediate action is required because the ACPE continues to process calls,(at a diminished capacity).
0003/0017 Message: no locality call processing for current call.
Description: The ACPE could not determine the locality treatment for the current call because the Locality Database is not in the Working state. This call will be handled according to the datafill of parameters Locality_Check and Loc_Default_Prompt in table User Interaction.
Action: No action is required because the ACPE continues to process calls,(at a diminished capacity).
0003/001A Message: [PRU_NAME], error. An invalid name plus locality mode, <invalid mode>, has been found in table "LOC_SCREEN_CODES". As a result ACPEs will not load.
Description: This log indicates that the valid values for the name plus locality mode field are given in the help information in the table editor.
Action: The table must be corrected before the ACPEs will load.
0003/0018 Message: ACPE failed to communicate with the Locality Database.
Description: This call will be handled according to datafill of the parameters Locality_Check and Loc_Default_Prompt in table User Interaction. Debugging information is provided.
Action: No action is required because the ACPE continues to process calls,(at a diminished capacity).
0003/0200 | Message: State table log |
| |
| Description: This is a log that is generated by the state table for application | ||
| TABS. Two lines of state data are provided. | ||
| Action: Action as indicated in the message. | ||
0003/0201 | Message: | Log generated by state table for application <TABS>. [Call | |
| abnormally terminated. See trace back for detail.] | ||
| Current state : <state code> | via input: <event #> | |
| Called from : | <state code> | via input: <event #> |
Status | Description: This log is generated by the state table when it encounters an | ||
| error during an event sequence. |
| |
Action: Contact NT immediately. Record the state and event codes listed in the log and report them to the NT representative.