Agilent Technologies E2251A user manual Reattach the Carrier Shields

Step 6. Reattach the Carrier Shields

1.Carefully place the place the PC board on the bottom Carrier shield. Align the mounting holes and secure with the mounting screw.

2.For modules mounted in the interior slots (M4 & M5), make certain their field wiring is not pinched.

3.Position the top shield and align the mounting holes. Install four screws securing the top and bottom shields.

4.Attach supplied M-Module labels to the Carrier top shield and the RFI Dress Panel to identify M-Module installed in the Carrier.

M3X6

Panhead

Note	Some earlier carriers did not have the screw securing the PC board to the bottom shield. Instead,
	they had a fifth screw securing the top and bottom shields. Remove all five screws to
	disassemble the Carrier.

16