Agilent Technologies E2251A user manual E2271A 4x4 Matrix Switch Wiring Information, ROW2LO

E2271A 4x4 Matrix Switch Wiring Information

MAXIMUM VOLTAGE/CURRENT: The maximum voltage that may be applied to any connector on the E2270A, E2271A, or E2272A is 200 VDC, 125 VAC rms, or 175 VAC peak. These limits apply only if the product is installed in a humidity-controlled (<60% RH) environment where airborne contaminants and transients are controlled, and there is NOT a relay connection made to power mains. If these conditions CANNOT be maintained, then the maximum voltage is 60 VDC, 48 VAC rms or 68 VAC peak.

The maximum current (non-inductive) that may be applied to the E2270A, E2271A, or E2272A is:

Per Switch: 2 ADC, 2 AAC peak

Per M-Module: 8ADC, 8AAC peak

				User Connector Pins
				4	ROW_0_HI
				20	ROW_0_LO
Channel 00	Channel 01	Channel 02	Channel 03
				6	ROW_1_HI
				22	ROW_1_LO
Channel 10	Channel 11	Channel 12	Channel 13
				8	ROW_2_HI
				24	ROW_2_LO
Channel 20	Channel 21	Channel 22	Channel 23
				10 ROW_3_HI
				26 ROW_3_LO
Channel 30	Channel 31	Channel 32	Channel 33	1, 3, 5, 7, 9, 11, 13, 14, 17,
				19, 21, 23, 25, 27, 29, 32-44
			User Connector Pins
2 COL_0_LO	16 COL_1_LO	12 COL_2_LO	15 COL_3_LO
18 COL_0_HI	31 COL_1_HI	28 COL_2_HI	30 COL_3_HI

29