Agilent Technologies E2251A user manual Contents

Contents

Agilent E2251A M-Module Carrier Installation and Wiring

Manual (Edition 2)

AGILENT TECHNOLOGIES WARRANTY STATEMENT	3
Safety Symbols	4
WARNINGS	4
WARNINGS (contd.)	5
Declaration of Conformity	6
M-Module Installation
Step 1. Remove the Carrier Shields	10
Step 2. Determine M-Module Layout	11
Step 3. Set the Logical Address for each M-Module	12
Guidelines for Determining Logical Addresses	12
Unused Slots on the Carrier	12
Setting the Addresses	13
Step 4. Install M-Modules onto the Carrier	14
Step 5. Connect Field Wiring to Slot M4 & M5 M-Modules	15
Step 6. Reattach the Carrier Shields	16
Step 7. Install Carrier into C-Size VXI Mainframe	17
Step 8. Connect Field Wiring to Front M-Modules	18
Step 9. Installation / Operational Verification	19
You Are Done	19
Removing M-Modules from the Carrier	20
M-Module Field Wiring Information
Assembling the M-Module Field Wiring Connector	21
E2259A Double-Wide Breadboard M-Module Wiring Information	24
E2261A Quad RS-232 Interface Wiring Information	26
E2270A 16-Channel Form A Switch Wiring Information	28
E2271A 4x4 Matrix Switch Wiring Information	29
E2272A Dual 8-to-1/Single 16-to-1 Relay Multiplexer Wiring Information	30
Configuring the E2272A	30
E2273A 8-Channel Form C Switch Wiring Information	32
E2274A 4-Channel Power Relay Wiring Information	33
E2290A 16-Bit Digital I/O Wiring Information	34
E2291A 16-Channel Isolated Digital Output Wiring Information	35

Contents 1