Vermont Casting DVT38IN Chimney Components, Component Description Model Number

			Chateau™
	Chimney Components
Component	Description	Model Number
Horizontal Starter Kit	Contains 24”-40” telescopic pipe* for minimum vertical	SK8DVSK
	rise from collar pipe, 90° elbow, horizontal
	through-wall starter pipe, zero clearance sleeve,
	metal adhesive tape, stove cement tube, sidewall
	termination and firestop.
SK8 Chimney Sections	Pipe used to build 8” (SK8) flue systems.	SK81 (1’ Long)
		SK818 (1Z\x’ Long)
		SK83 (3’ Long)
		SK84 (4’ Long)
SK8 Chimney Elbows	Elbow used to create an offset in an 8”	SK830-2 30° Elbow*
	chimney system.	(2 per pkg.)
		SK845 45° Elbow*
		SK890 90° Elbow*
Firestop	Required at each floor level of chimney	SKFS2A —
	installation. (Plus attic on multi-story installation.)	(8” straight flue)
		SK8DVFS
		(Horizontal Firestop)
Zero Clearance Sleeve	Used when horizontal pipe goes through an interior	SK8ZCS
	vertical wall.
Attic Insulation Shield	Used to prevent insulation from coming in contact with	AIS-SK
	the chimney system.
Chimney Support	Used to support chimney for each of: 30’ vertical	SKCS8
	height and 6’ of angled chimney run.
Round Top Termination	Top used to terminate chimney at roof.
	(Flashing not included.)	RLTSK8
Round Top Termination -	Top used to terminate chimney at chase.
Extended	(Flashing not included.)	RLTSK8L
Flashing	Metal finishing required around termination	8-6-12 with 8” flue:
	to prevent rain leakage.	0-6/12 pitch
		8-12-12 with 8” flue:
		6/12-12/12 pitch
Housing Extensions	Extends Square Termination on steep	202036
	pitched roofs.
Chase Top Housing	Low profile pyramid-style chimney cap used to	PTLSK8
	terminate chimney through a chase. Includes
	adapter. (Flashing not included.)
Chase Top Housing	Square chimney cap used to terminate chimney	SLTSK8
	through a chase. Terra Cotta Masonry. Includes
	adapter. (Flashing not included.)
Horizontal Termination	Cap used to terminate venting through a sidewall.	SK8DVRVT

NOTE: The 24”-40” telescopic pipe is only intended for use with the SK8DVSK. * Factory unitized elbow

20011956 25