Meco 6623S8E641 manual Step Side Tables to Cart Frame Assembly, Step Heat Shield Assembly

11

Step 7

Side Tables to Cart Frame Assembly

Attach the Side Tables to the Legs of the Cart Frame as shown with 8) 1/4-20 x .79” Bolts (4 each Side Table). Place the dimpled side of the Side Table Supports against the legs and align the holes. Insert the bolts through the supports and into the threaded inserts in the legs.

Right Side Table

Left Side Table

1/4-20 x .79” Bolt

8 pc

!CAUTION

To reduce the risk of a laceration hazard, wear protective gloves when handling parts that have sharp edges.

Step 8

Heat Shield Assembly

Attach the Control Panel Heat Shield to the top of the Front U-Leg with 2) 5/32-30 x .39” Bolts. The heat shield will be inside the cart frame.

The Cylinder Heat Shield is shown here for location reference only and will be attached in a later step at the same time as the Bowl.

5/32 x .39” Bolt

2 pc

Cylinder Heat Shield (Shown for reference only)

Right Side Table

	Control Panel
Left Side Table	Heat Shield