18
Step 19
A. Main Burner Electrode Assembly
Insert small end of each Electrode Wire down through holes in Bowl in front of main burner until flange of collector box rests on front edge of burner. Fasten each Electrode collector box to the burner with 1) #5 x .31” Tapping screw.
B. Electrode Wire Plug Assembly
Route all electrode wires, including Side Burner wire, away from the burners and bowl then plug ends into the receptacles on the back of the Ignition Box mounted in the control panel. Specific plug location is not necessary as all recepticals are common.
#5 x .31” Tapping Screw
2 pcs.
A
Ignition Box
B