Meco 6623S8E641 manual Step Shroud Assembly

12

Step 9

Shroud Assembly

A. Lay the Control Panel and Left, Right and Bottom Shroud Frames face down on floor (on a protective surface). Align brackets at corners and fasten together with 8) 1/4-20 x .39” Bolts and Nuts.

B. Place the Shroud on the assembled frame and align the holes in the shroud with the holes in the tabs on the frame. Fasten the Shroud to the shroud frame with 12) #5 x .31” Tapping Screws.

1/4-20 x .39” Bolt

and Nut

8 pc Each

A Control Panel

Left Shroud Frame

Right Shroud Frame

Bottom Shroud Frame

Shroud

B

#5 x .31” Tapping Screw

12 pcs.