Meco 6623S8E641 manual Step Rear Crossbrace Assembly

Page 9

9

Step 3

Rear Crossbrace Assembly

Attach Rear Crossbrace inside Rear Leg Frame with 4) 1/4-20 x .39” Bolts. Note: The flanges on the ends of the cross- brace tube are angled inward toward the top to match the angle of the legs.

1/4-20 x .39” Bolt

4 pc

Step 4

Bowl Supports, Cylinder Support and Side Crossbrace Assembly

Attach the Left and Right Bowl Supports, Clyinder Support and Crossbrace to rear leg assembly with 8) 1/4-20 x .39” Bolts. Note: Each part must be oriented as shown for proper assembly. Bolts should be snug but do NOT tighten com- pletely at this stage. Note: The flanges on the ends of the crossbrace tube are angled inward toward the top to match the angle of the legs.

 

 

Rear Leg Assembly

 

 

 

 

 

 

Right

Side Crossbrace

 

Left Bowl Support

 

 

 

 

 

 

Bowl Support

 

 

 

 

 

 

 

Holes are closest to

 

 

 

 

OUTSIDE edge

 

 

 

1/4-20 x .39” Bolt

8 pc

Low side of raised area to center

Rear Leg

Assembly Holes in Bowl

Support align

with leg

NOTE:

Threaded Insert on top

Leftand nearest rear legs Bowl Support

NOTE:

notches closest together to outside

Cylinder Support

Rear Leg Assembly

Image 9
Contents For Outdoor Household Use Only. Not for Commercial Use 6623S8E6416623S8Y641Carbon Monoxide Hazard Tools Required for AssemblyPreparation for Assembly ContentsParts Illustration Model 6623S8E641 Parts List- Model 6623S8E641 Key Description QuantityDescription Quantity Parts Illustration Model 6623S8Y641 Parts List- Model 6623S8Y641 Assembly Instructions Step Front Leg Frame AssemblyStep Rear Leg Frame Assembly Step Rear Crossbrace Assembly Step Side Table Support Assembly Step Cart Frame AssemblyStep Heat Shield Assembly Step Side Tables to Cart Frame AssemblyStep Shroud Assembly Step Shroud to Cart Assembly Step Manifold AssemblyStep Wheel Assembly Model 6623S8Y641 Wheel Assembly Model 6623S8E641Step Cylinder Blocking Wires Assembly Step Main Burner Assembly Step Drip Cup Wire AssemblyBrace Wire Attachment Step Bowl and Cylinder Heat Shield AssemblyStep Side Burner Assembly Step Side Burner Electrode AssemblyElectrode Wire Plug Assembly Step Main Burner Electrode AssemblyThermometer Assembly Model 6623S8Y641 only Step Hood/Hinge AssemblyStep Hood Handle Step Cooking Grid / Control Knob Assembly Step Flavor Activator / Warming Rack AssemblyStep Drip Cup Assembly Cylinder Retainer Wire AssemblyStep Battery in Igniter Installation Connecting/Disconnecting the Gas Using GasLP Gas Cylinder LP Hose and Regulator Connecting LP Gas CylinderInstallation Codes Before Using Your LP Gas GrillSelecting a Location Performing a Leak TestHow to Perform a Leak Test First Time USE and as required Check The Flame Lighting the Grill Using the Pulse-Spark IgnitorManual Lighting of the Grill on Manually Lighting the Grill Lighting the Side Burner Manually Lighting the Side BurnerManually Lighting the Side Burner Grill Cooking Direct Method Cooking On the Gas GrillRoasting Indirect Method Direct Cooking on the GridsIndirect Cooking Roasting End of Cooking Session Warming RackCleaning the Grill Care and MaintenanceHow to Clean the Burners 16 gap Storage Emergencies TroubleshootingClean the Burners. See How to Clean Burners in Care MaintenanceSee How to Clean Burners in Care and Maintenance Important Notice Meco Corporation Limited Warranty Limited Warranty