Meco manual Step Wheel Assembly Model 6623S8Y641, Wheel Assembly Model 6623S8E641

14

Step 12

A. Wheel Assembly (Model 6623S8Y641)

Insert the axle (pre-assembled to wheel) through the sleeve in the bottom of the leg tube. Fasten in place by inserting an Axle Pin through the small hole near the end of the axle.

B. Wheel Assembly (Model 6623S8E641)

Insert the Axle through the Wheel then through the sleeve in the bottom of the leg tube. Fasten in place by inserting an Axle Pin through the small hole near the end of the axle.

Axle

Wheel with pre-
assembled axle	Axle Pin		B
A
		Axle Pin

Axle Pin

!WARNING

To reduce the risk of serious bodily injury or death from fire or explosion:

Never remove guards or devices to prevent storage of spare or oversize LP Gas Cylinders not recommended for this grill.

Step 13

Cylinder Blocking Wires Assembly

Attach the Cylinder Blocking Wires to the cart with 4) 5/32 x .47” Bolts.

The Short Cylinder Blocking Wire attaches to the left front leg and the Side Crossbrace. The Long Cylinder Blocking Wire attaches to the right front leg and the left rear leg.

5/32 x .47” Bolt

4 pc

Short Cylinder Blocking Wire

Long Cylinder Blocking Wire