Emerson 8712E manual Wiring the Transmitter to the Sensor, Description, Part Number

Quick Installation Guide

Rosemount 8712 / 8700 Series

00825-0100-4664, Rev BB January 2013

STEP 6 CONTINUED...

To order cable specify length as quantity desired. 25 feet = Qty (25) 08732-0753-1003

Table 7. Cable Requirements
Description	Length	Part Number
Coil Drive Cable (14 AWG)	ft	08712-0060-0001
Belden 8720, Alpha 2442	m	08712-0060-2013
or equivalent
Signal Cable (20 AWG)	ft	08712-0061-0001
Belden 8762, Alpha 2411	m	08712-0061-2003
or equivalent
Combination Cable	ft	08732-0753-1003
Coil Drive Cable (18 AWG) and	m	08732-0753-2004
Signal Cable (20 AWG)

WARNING

Potential Shock Hazard Across Terminals 1 & 2 (40 Vac).

Wiring the Transmitter to the Sensor

When using individual cables for coil drive and signal refer to Table 8. If using the combination coil drive and signal cable, refer to Table 9. See Figure 16 for transmitter specific wiring diagram.

1.Connect the coil drive cable using terminals 1, 2, and 3 (ground).

2.Connect the signal cable using terminals 17, 18, and 19.

Table 8. Individual Coil and Signal Cables
Transmitter Terminal	Sensor Terminal	Wire Gauge	Wire Color
1	1	14	Clear
2	2	14	Black
3 or Ground	3 or Ground	14	Shield
17	17	20	Shield
18	18	20	Black
19	19	20	Clear
Table 9. Combination Coil and Signal Cable
Transmitter Terminal	Sensor Terminal	Wire Gauge	Wire Color
1	1	18	Red
2	2	18	Green
3 or Ground	3 or Ground	18	Shield
17	17	20	Shield
18	18	20	Black
19	19	20	White

20