Vanguard Managed Solutions MBDV41, MBDV37 High Altitude Installation, Vanguard Rigid Venting

OWNER’S MANUAL

VENTING INSTALLATION

Continued

HIGH ALTITUDE

INSTALLATION

Your Vanguard direct-vent fireplace has been AGA tested and approved for eleva- tions from 0-2000 feet and CGA certified for elevations from 0-4500 feet.

When installing this fireplace at an elevation above 2000 feet (in the USA), you may need to decrease the input rating by changing the existing burner orifice to a smaller size. Re- duce input 4% for each 1000 feet above sea level. Check with your local gas company for proper orifice size identification.

When installing this fireplace at an eleva- tion above 4500 feet (in Canada), check with local authorities.

Consult your local gas company to help de- termine the proper orifice for your location.

For assistance with any high altitude instal- lation contact DESA International’s Tech- nical Service Department at 1-800-DESA- LOG (1-800-337-2564).

PARTS LISTS FOR VENTING KITS AND COMPONENTS

Note: Terminations are not designed for installation prior to transportation.

Vanguard Rigid Venting

Number Description

MDV9K 9' Vertical Vent Kit

Includes one each: 48" Pipe, 36"

Pipe, 24" Pipe, 30° Elbow,

Firestop, Roof Flashing, Storm

Collar, Flue Restrictor Disc, and

Vertical Termination Cap

MDVGFK Ground Floor Horizontal Vent

Kit (Allows horizontal installations

that run 49.5" min. vertically and 15" horizontally from the back of the fire- place to the outside wall.)

Includes one each: 12" Pipe, 7"-12" Adjustable Pipe, 30° Elbow, 90° Elbow, Firestop, Vinyl Stand- off,andHorizontalTerminationCap

BGFVK Basic Ground Floor Rigid Vent Kit

Includes:7"x60°Elbow,Extended Adjustable Horizontal Termina- tion, Wall Thimble and 14 Screws

Vanguard Rigid Venting (Cont.)

Number Description

GFVK	Ground Floor Rigid Vent Kit
	Includes: 7" x 60° Elbow, 7" Ad-
	justable Galvanized Coaxial Pipe
	(7-12"), Wall Thimble, Horizontal
	Termination, RTV Silicone and 16
	Screws
BVK	Basement Rigid Vent Kit
	Includes: 7" x 30° Elbow, 7" x 4'
	Galvanized Pipe, 7" x 90° Elbow,
	7" Adjustable Galvanized Pipe (7-
	12"), Wall Thimble, Horizontal
	Termination, RTV Silicone and
	20 Screws
CVK	Corner Vent Kit
	Includes: 7" x 30° Elbow, 7" x
	90° Elbow, 7" Adjustable Galva-
	nized Pipe (7-12"), 6" Pipe, Wall
	Thimble, Horizontal Termina-
	tion, RTV Silicone and 20 Screws
SVK	Snorkel Rigid Vent Kit
	Includes: 7" x 30° Elbow, 7" x 4'
	Galvanized Pipe, 7" x 90° El-
	bow, 7" Adjustable Galvanized
	Pipe (7-12"), Wall Thimble, 36"
	Snorkel Termination, RTV Sili-
	cone and 28 Screws
RVF	Roof Rigid Vent Kit
	Includes: Flue Restrictor, Storm
	Collar, 7" x 30° Elbow, 7" x 4'
	Galvanized Pipe, 7" x 2' Galva-
	nized Pipe, 7" Adjustable Gal-
	vanized Pipe (7-12"), Firestop
	Support, Roof Flashing, RTV
	Silicone, Vertical Termination,
	and 26 screws
D1000	7" x 12" Galvanized Coaxial
	Pipe(6 pcs.)
D1010	7" x 24" Galvanized Coaxial
	Pipe(6 pcs.)
D1020	7" x 48" Galvanized Coaxial
	Pipe(6 pcs.)
D1030	7" Adjustable (7-12")
	Galvanized Coaxial Pipe
	(6 pcs.)
D1050	7" x 6" Galvanized Coaxial Pipe
	(6 pcs.)
D2000	7" x 90° Elbow (6 pcs.)
D2010	7" x 45° Elbow (6 pcs.)
D2020	7" x 30° Elbow (6 pcs.)

Vanguard Rigid Venting (Cont.)

Number Description

D2030 7" x 60° Elbow (6 pcs.)

D2060 7" x 45° Starter Elbow

D3000 Wall Strap/Offset Support (6 pcs.)

D3010 Storm Collar (6 pcs.)

D3020 Wall Thimble (6 pcs.)

D3050 Vertical Restrictor (6 pcs.)

D3060 CeilingFirestop/Support(6pcs.)

D3070 Rectangular Horizontal Rigid Vent Termination Cap

D3071 Adjustable Horizontal Rigid Vent Termination Cap

D3090 Cathedral Ceiling Support Box

D4000 Roof Flashing 6/12-9/12

D4010 Roof Flashing 9/12-12/12

D4020 Flex Connector (6 pcs.)

D4030 Flex Wall Thimble (6 pcs.)

D4040 4" Hose Clamp (6 pcs.)

D4050 7" Hose Clamp (6 pcs.)

D5000 Wood/Vinyl Siding Standoff (6 pcs.)

Vanguard Flexible Venting

Number Description

BFGFVK Basic Flex Ground Floor Vent Kit

Includes: Flex Adapter, 7" x 2'

Flexible Pipe, 4" x 2' Flexible

Pipe, Wall Thimble, Horizontal

Termination, (2) Spacer Springs,

(2)4" Hose Clamps, (2) 7" Hose Clamps, and 10 Screws

FGFVK Flex Ground Floor Vent Kit

Includes: Flex Adapter, 7" x 4' Flexible Pipe, 4" x 4' Flexible Pipe, Wall Thimble, Horizontal Termi- nation, (4) Spacer Springs, (2) 4" HoseClamps,(2)7"HoseClamps, RTV Silicone, and 10 Screws

D1040 7" x 25' Coaxial Flex Pipe

with Spacer Springs

D3080 Rectangular Horizontal Flex

Termination Cap

Continued

106497 15