Desa RFP28TB Ventilation AIR, Ventilation Air From Inside Building, Appliances in both spaces

Page 10

AIR FOR

 

WARNING ICONG 001WARNING

 

COMBUSTION

 

 

 

 

 

 

If the area in which the heater may be operated is smaller than

 

AND

 

that defined as an unconfined space, provide adequate combus-

 

 

tion and ventilation air by one of the methods described in the

 

VENTILATION

 

 

 

National Fuel Gas Code, ANSI Z223.1, 1992, Section 5.3.

 

Continued

VENTILATION AIR

 

 

 

 

Ventilation Air From Inside Building

 

 

This fresh air would come from an adjoining unconfined space. When ventilating to an

 

 

adjoining unconfined space, you must provide two permanent openings: one within 12" of the

 

 

ceiling and one within 12" of the floor on the wall connecting the two spaces (see options 1 and

 

 

2, Figure 8). You can also remove door into adjoining room (see option 3, Figure 8). Follow

 

 

the National Fuel Gas Code NFPA 54/ANSI Z223.1, Section 5.3, Air for Combustion and

 

 

Ventilation for required size of ventilation grills or ducts.

 

 

 

 

 

 

 

WARNING ICONG 001WARNING

 

 

 

Rework worksheet, adding the space of the adjoining unconfined

 

 

 

space. The combined spaces must have enough fresh air to supply all

 

 

 

appliances in both spaces.

 

12"

 

Ventilation Grills

Ventilation

Into Adjoining Room,

Option 2

Grills

Or

into Adjoining

Remove

Room,

Door into

Option 1

Adjoining

 

Room,

 

Option 3

12"

Figure 8 - Ventilation Air from Inside Building

10

101935

Image 10
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety InformationSafety Information Piezo Ignition System Safety DeviceProduct Identification Thermostatic Heat ControlInstalling Log AssemblyRemoving Front Panel Of Heater Attaching Brass Front Trim to Front Panel Assembling HeaterAssembly Assembling and Attaching Brass TrimVentilation AIR forProviding Adequate Ventilation Determining AIR Flow for Heater Location AIR for Combustion and VentilationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Inside Building Ventilation AIRAppliances in both spaces Ventilation AIR Ventilation Air From OutdoorsCheck GAS Type InstallationInstallation Items Locating HeaterLocating Thermostat Sensing Bulb Thermostat Sensing BulbAttaching Thermostat Sensing Bulb Methods For Attaching Mounting Bracket To Wall Installation OptionsMounting Bracket Marking Screw LocationsAttaching Mounting Bracket to Wall Placing Heater On Mounting BracketSecuring Hearth Base to Floor Mounting Heater on Optional Hearth BaseMounting Heater to Optional Hearth Base Attaching Heater to Hearth BaseInstalling Mantel to Heater Assembling MantelPre-Drilled Hole Screw Hearth Base Accessory Wood Plug Connecting to GAS Supply External Regulator with Vent Pointing DownSupply ConnectingTo GAS Checking GASPressure Testing Heater GAS Connections CheckingFor Your Safety Read Before Lighting Operating HeaterPilot Shutting Off Heater Shutting Off Burner Only pilot stays litInspecting Burner Pilot Flame PatternBurner Flame Pattern Correct Burner Flame PatternODS/PILOT and Burner Trouble ShootingCabinet Cleaning and Mainte TroubleTROUBLE- Shooting Do not try to light any appliance If you smell gasShut off gas supply Ing statement atTechnical ServiceReplacement Parts HintsParts Centrals FBDHearth Base GHB802B or GHB38 AccessoriesFAN KIT GA3100A Manual or GA3200TA Thermostat GS601 Black SurroundUnfinished GMC23UA Finished GMC22FA Unfinished GMU801A,B Finished GMF800A,BUnfinished GMC33U Finished GMC32F RFP28TB Parts List RFP28TB KEY Part Number Description101935 101935 Warranty Information Keep this Warranty