Desa RFP28TB installation manual Attaching Brass Front Trim to Front Panel, Assembling Heater

ASSEMBLY

Continued

WARNING

WARNING ICON G 001

Always have burner shield and screen in place before operating heater. This prevents excessive temperatures on heater surfaces.

Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.

Log Heater Cabinet

Deflector

Front Panel	Log
	Retaining
Screen	Brackets

Truss-

Head

Screw

Nut

Screw

Brass

Front

TrimScrew

Burner Shield

6

Figure 4 - Assembling Heater

Attaching Brass Front Trim to Front Panel

1.Locate brass front trim in brass trim package.

2.Slide the head of two truss-head screws from hardware packet into each end of brass front trim (see Figure 5).

3.Line up screws with holes in front panel (see Figure 4). Insert screws in holes. Attach nuts from inside of front panel. Tighten with wrench.

Front Panel

Brass Front

Trim

Truss-Head Screw Nut

Figure 5 - Attaching Brass Front Trim to Front Panel

101935