Desa RFP28TB installation manual Assembly, Removing Front Panel Of Heater, Installing Log

Page 5

	ASSEMBLY	ASSEMBLING HEATER
	ASSEMBLY	Tools Required: Phillips screwdriver, 5/16" hex wrench, and slotted screwdriver

Removing Front Panel Of Heater

1.Remove two screws near bottom corners of front panel with Phillips screwdriver.

2.Pull bottom of front panel forward, then down (see Figure 2) .

Figure 2 - Removing Front Panel of Heater

Installing Log

Note: For easier installation, lay heater on its back.

1.Remove log from inside top of heater. Discard protective packaging.

2.Attach ignitor cable to piezo ignitor (see Figure 3).

Piezo Ignitor

Ignitor Cable

Figure 3 - Attaching Ignitor Cable to Piezo Ignitor

3.With Phillips screwdriver, remove four screws holding screen in place. Remove screen.

4.Gently slide log between log retaining brackets on deflector assembly (see Figure 4, page 6). The log should fit firmly against bottom of log retaining brackets.

5.Reattach screen using four screws removed in step 3.

Continued	5

101935

Image 5

Contents What to do if YOU Smell GAS OWNER’S Operation and Installation ManualSafety Information ContentsSafety Information Product Identification Safety DevicePiezo Ignition System Thermostatic Heat ControlRemoving Front Panel Of Heater AssemblyInstalling Log Assembling Heater Attaching Brass Front Trim to Front PanelAssembling and Attaching Brass Trim AssemblyProviding Adequate Ventilation AIR forVentilation Determining if You Have a Confined or Unconfined Space AIR for Combustion and VentilationDetermining AIR Flow for Heater Location Appliances in both spaces Ventilation AIRVentilation Air From Inside Building Ventilation Air From Outdoors Ventilation AIRInstallation Items InstallationCheck GAS Type Locating HeaterAttaching Thermostat Sensing Bulb Thermostat Sensing BulbLocating Thermostat Sensing Bulb Mounting Bracket Installation OptionsMethods For Attaching Mounting Bracket To Wall Marking Screw LocationsPlacing Heater On Mounting Bracket Attaching Mounting Bracket to WallMounting Heater on Optional Hearth Base Securing Hearth Base to FloorAttaching Heater to Hearth Base Mounting Heater to Optional Hearth BaseAssembling Mantel Installing Mantel to HeaterPre-Drilled Hole Screw Hearth Base Accessory Wood Plug External Regulator with Vent Pointing Down Connecting to GAS SupplyTo GAS ConnectingSupply Checking GASChecking Pressure Testing Heater GAS ConnectionsOperating Heater For Your Safety Read Before LightingPilot Shutting Off Burner Only pilot stays lit Shutting Off HeaterPilot Flame Pattern Inspecting BurnerCorrect Burner Flame Pattern Burner Flame PatternCabinet Trouble ShootingODS/PILOT and Burner Trouble Cleaning and MainteTROUBLE- Shooting Shut off gas supply If you smell gasDo not try to light any appliance Ing statement atReplacement Parts ServiceTechnical HintsFBD Parts CentralsFAN KIT GA3100A Manual or GA3200TA Thermostat AccessoriesHearth Base GHB802B or GHB38 GS601 Black SurroundUnfinished GMC33U Finished GMC32F Unfinished GMU801A,B Finished GMF800A,BUnfinished GMC23UA Finished GMC22FA RFP28TB KEY Part Number Description Parts List RFP28TB101935 101935 Keep this Warranty Warranty Information