Desa RFP28TB installation manual Pre-Drilled Hole Screw Hearth Base Accessory Wood Plug

Page 19

INSTALLATION

Continued

2.Locate pre-drilled holes at bottom of each side of mantel (see Figure 23). Use an electric drill with 1/8" drill bit. Insert drill bit into pre-drilled holes in mantel and drill through heater hearth base. Make sure the drill bit does not damage any gas plumbing lines inside hearth base.

3.Locate two 2" screws from hardware package. Insert screws through pre-drilled holes at bottom of each side of mantel (see Figure 23). Tighten each screw into the heater hearth base. Make sure the screw tips do not damage any gas plumb- ing lines inside hearth base. Note: The pre-drilled holes are countersunk.

Tighten the screws all the way into the holes.

4.Locate two wood plugs from hardware package. Insert plugs into screw holes (see Figure 23). Tap into place.

Pre-Drilled

Hole

2" Screw

Hearth Base

Accessory

Wood Plug

 

Figure 23

 

101935

19

Image 19
Contents What to do if YOU Smell GAS OWNER’S Operation and Installation ManualSafety Information ContentsSafety Information Thermostatic Heat Control Safety DeviceProduct Identification Piezo Ignition SystemInstalling Log AssemblyRemoving Front Panel Of Heater Assembling Heater Attaching Brass Front Trim to Front PanelAssembling and Attaching Brass Trim AssemblyVentilation AIR forProviding Adequate Ventilation Determining AIR Flow for Heater Location AIR for Combustion and VentilationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Inside Building Ventilation AIRAppliances in both spaces Ventilation Air From Outdoors Ventilation AIRLocating Heater InstallationInstallation Items Check GAS TypeLocating Thermostat Sensing Bulb Thermostat Sensing BulbAttaching Thermostat Sensing Bulb Marking Screw Locations Installation OptionsMounting Bracket Methods For Attaching Mounting Bracket To WallPlacing Heater On Mounting Bracket Attaching Mounting Bracket to WallMounting Heater on Optional Hearth Base Securing Hearth Base to FloorAttaching Heater to Hearth Base Mounting Heater to Optional Hearth BaseAssembling Mantel Installing Mantel to HeaterPre-Drilled Hole Screw Hearth Base Accessory Wood Plug External Regulator with Vent Pointing Down Connecting to GAS SupplyChecking GAS ConnectingTo GAS SupplyChecking Pressure Testing Heater GAS ConnectionsOperating Heater For Your Safety Read Before LightingPilot Shutting Off Burner Only pilot stays lit Shutting Off HeaterPilot Flame Pattern Inspecting BurnerCorrect Burner Flame Pattern Burner Flame PatternODS/PILOT and Burner Trouble ShootingCabinet Trouble Cleaning and MainteTROUBLE- Shooting Ing statement at If you smell gasShut off gas supply Do not try to light any applianceHints ServiceReplacement Parts TechnicalFBD Parts CentralsGS601 Black Surround AccessoriesFAN KIT GA3100A Manual or GA3200TA Thermostat Hearth Base GHB802B or GHB38Unfinished GMC23UA Finished GMC22FA Unfinished GMU801A,B Finished GMF800A,BUnfinished GMC33U Finished GMC32F RFP28TB KEY Part Number Description Parts List RFP28TB101935 101935 Keep this Warranty Warranty Information