Dyna-Glo DGP350NP-D user manual Assembly Instructions, Step, Hardware Used, Parts Used

LP Gas Grill

ASSEMBLY INSTRUCTIONS

Step 1

1.Secure each locking caster (2) to the back side (side that is beveled for access to locking mechanism when assembled and upright) of the bottom shelf (1) using four screws (A) four spring washers (F) ) and four flat washers (G). Then tighten all screws.

2.Install the casters (3) to the front side

(not beveled) of bottom shelf using four screws (A) four spring washers (F) ) and four flat washers (G). Then tighten all screws.

3 2

1

Back Side Beveled

Hardware Used

A	M6x12	16 pc	F
	Scr ew
F	6MM	16 pc
	Spring Washer
G	6MM	16 pc	G
	Flat Washer

A

Step 2

First, remove the pins (7) from the cylinder holder (6). Insert the cylinder holder (6) through the holes in the bracket pre-attached to the cart right side panel (5). Lock in place with the pins (7).

Parts Used

6	Cylinder	1 pc
	Holder
7	Pin	2 pc

5

6

7

9