Dyna-Glo DGP350NP-D user manual Control Knob

LP Gas Grill

ASSEMBLY INSTRUCTIONS

Step 9

1.Secure the cart swivel upper rear panel (11) to the cart left side panel (4) and cart right side panel (5) with two screws (C).

Then install another 2 screws (C) into the upper mounting holes of the left and right side panels. These will secure the cart swivel upper rear panel (11) when it is in the closed position.

2.Rotate the cart swivel rear panel upper (11) upwards until the two screws

(C) on the cart left and right side panels snap into the two slots on the cart swivel rear panel upper.

5 C

4

11

11

Hardware Used

C	M6	4 pc
	Step Screw

Step 10

Install the control knobs (13) onto the control panel of the grill body (12) by gently pushing them onto the valve stem.

12

13

Parts Used

13	Control	2 pc
	Knob

13