LP Gas Grill
ASSEMBLY INSTRUCTIONS
Step 3 | 4 |
1.Attach the cart left side panel
(4) to the bottom shelf (1) with two screws (A), but do not fully tighten.
2.Attach the cart right side panel (5) to the bottom shelf (1) in the same way.
15
Hardware Used
A | M6x12 | 4 pc |
Scr ew |
Step 4
Install two screws (A) into the cart left side panel and two screws (A) into the cart right side panel (5) as illustrated at right. Do not fully tighten screws (keep approximately 4 to 6mm from fully installed) as the cart rear panel (8) has key hole slots that need to slide onto these screws.
5 A
Hardware Used
A | M6x12 | 4 pc |
Scr ew |
10
A
8