Assemble Grill
IMPORTANT: Remove all packing material prior to assembly/use.
Assemble Wheels and Towing Handle
■Remove grill, wheels, handle, and regulator from packaging.
■Inspect all packing and remove all parts.
■See carton for parts included with your unit.
■ Assemble wheels to grill base. Attach each wheel to axle using one bolt and one washer. (Fig. 3, Fig. 4)
Fig. 3 |
Fig. 4 | NOTE: | |
Use wrench provided. | ||
|
Set up the Grill
■ Place foot on plastic |
towing handle, grasp |
metal handle on grill |
and lift until stand is fully |
extended. (Fig. 9) |
■ Continue to pull grill |
handle toward you until |
stand is fully extended. |
(Fig. 10) |
■ Lower grill and slide grill |
back until leg extensions |
lock into brackets on |
Fig. 10 |
Fig. 9 |
■Press one hub cap into each wheel (Fig. 5)
■Insert towing handle into bracket on grill stand. (Fig. 6)
■Press down button on towing handle and continue to push handle
in until it locks in first hole on bracket. (Fig. 7)
■Once handle is locked in position, the grill can easily be moved to any location in your campsite or backyard. (Fig. 8)
Fig. 5 |
Fig. 6 |
Fig. 7 |
bottom of grill stand. (Fig. |
11, Fig. 12, Fig. 13) |
Fig. 12 |
Install the Drip Tray
■Install drip tray below rear of grill. (Fig. 14)
Fig. 11 |
Fig. 13 |
Fig. 14 |
Fig. 8 |