WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
2.Plug into a grounded
3.Gently slide grill completely into outdoor enclosure.
4.Now go to the “Check and Adjust the Burners” section.
Conversion to LP Gas
(IfLP gas conversion is desired)
IMPORTANT: If LP gas conversion is desired, follow requirements outlined in the “Gas Connection Requirements” section.
WARNING
Explosion Hazard
Use a new CSA International approved “outdoor” gas supply line.
Securely tighten all gas connections.
If connected to LP, have a qualified person make sure gas pressure does not exceed 11” (28 cm) water column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and authorized service personnel.
Failure to do so can result in death, explosion, or fire.
IMPORTANT: A 20 lb LP gas fuel tank must be purchased separately.
IMPORTANT: The gas pressure regulator/hose assembly supplied with the conversion kit must be used. Replacement gas pressure regulator/hose assembly specific to your model, is available from your outdoor grill dealer.
To Install the 20 lb LP Gas Fuel Tank:
1.Install the 20 lb LP gas fuel tank tray according to the instructions provided with the LP Gas Conversion Kit, Part Number W10118099.
2.Place the 20 lb LP gas fuel tank bottom collar into the mounting hole in the LP tank tray.
3.Tighten the locking screw against the bottom collar of the 20 lb LP gas fuel tank to secure.
C
AB
A.Bottom collar
B.Mounting hole
C.Locking screw
4.Screw the gas pressure regulator/hose assembly to the 20 lb LP gas fuel tank as shown.
A
B
A. 20 lb LP gas fuel tank
B. Gas pressure regulator/hose assembly
5.Turn on the gas supply. Wait a few minutes for gas to move through the gas line.
6.Test all connections by brushing on an approved noncorrosive
7.Go to “Check and Adjust the Burners” section.
11