Teledyne 3110 operating instructions Method of Analysis, Micro-Fuel Cell, Cell Warranty

Page 13

Portable Trace Oxygen Analyzer

Introduction

 

 

•Quick Disconnect Fittings: Dual self-sealing quick disconnect fittings are installed for making easy sample connections.

1.3Method of Analysis

The sample oxygen is measured by a unique electrochemical transducer which functions as a fuel cell; in this instance, the fuel is oxygen. Oxygen diffusing into the cell reacts chemically to produce an electrical current that is proportional to the oxygen concentration in the gas phase immediately adjacent to the transducer’s sensing surface. The linear, but minute signal produced by the transducer from oxygen is amplified by a two-stage amplifier. The O2 sensor output signal is digitized and fed to the microprocessor. Additional signal conditioning and temperature compensation are handled electronically and appropriate signals are directed to the display and output ports.

1.4 Micro-Fuel Cell

The micro-fuel cell (U.S. Pat. Nos. 3,767,552 and 3,668,101) is a sealed electrochemical transducer with no electrolyte to change or electrodes to clean. When the cell reaches the end of its useful life, it is removed, properly disposed of, and replaced with a new cell. The life of the cell is warranted by TAI (see below).

The cell is specific for oxygen and is not sensitive to flow rate or reducing agents such as hydrocarbons, carbon monoxide, sulfur dioxide, etc. In the absence of oxygen, no current is produced; thus, no zeroing is required.

1.4.1 Cell Warranty

The Class B2-C, A2C, B2C-XL and Insta Trace micro-fuel cells can be used in the Model 3110 and are warranted for six (6) months from the date of shipment.

With regard to spare cells, service time starts when the cell is removed from its shipping package. You should stock only one spare cell per instrument at a time.

If a cell was working satisfactorily but ceases to function before the warranty period expires, the sensor will be replaced at no cost.

Teledyne Analytical Instruments

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Teledyne Analytical Instruments ModelIi Teledyne Analytical Instruments ModelPortable Trace Oxygen Analyzer Specific Model InformationIv Teledyne Analytical Instruments Safety MessagesPortable Trace Oxygen Analyzer Table of Contents Appendix Maintenance & TroubleshootingIndex Teledyne Analytical Instruments Viii Teledyne Analytical Instruments List of FiguresCombustible GAS Usage Introduction IntroductionIntroduction Model Portable Trace Oxygen Analyzer Introduction FeaturesIntroduction Model Method of Analysis Cell WarrantyMicro-Fuel Cell Accuracy and Response Signal OutputCompact Packaging Portable Trace Oxygen Analyzer Introduction Intentionally left blank Portable Trace Oxygen Analyzer Installation InstallationCharging the Batteries Gas Connections Installation ModelPortable Trace Oxygen Analyzer Installation Installing a Trace Sensor Sensor InstallationCalibration Calibration Procedure for Trace AnalysisBleeding the Regulator and Purging the Gas Line Set the Sample Flow rateExternal Signal Front Panel Interface OperationOperation Model Enter KeyEscape Key Portable Trace Oxygen Analyzer Operation3 UP/DOWN Keys Available Menus and Their Sequence Operation and Setup Screens and MenusHome Screen Power on ScreenDate Screen Time Screen EnterAlarm Enable Standard Alarm ScreenHI-LOW Alarm Screen FS Alarm ScreenLtch Alarm Screen Range 2 Screen Range 1 ScreenRange Screen Span Screen Span Value ScreenFilter Screen LOG Intv Screen LOG Reset & Start ScreenLOG Transmit Screen Power Down Screen Portable Trace Oxygen Analyzer Operation Routine Maintenance Maintenance & TroubleshootingReplacing the Battery Maintenance ModelPortable Trace Oxygen Analyzer Maintenance Battery Power Supply ServiceBattery Charger Port on the Model Cell ReplacementCell Warranty Temperature Compensation Effects of CO2 on B-2 Cell Life Effect of CO2 on B-2 Cell LifeProcedure Leak TestingIntentionally left blank Appendix SpecificationsAppendix Model Portable Trace Oxygen Analyzer Appendix Spare Parts ListIndex Portable Trace Oxygen Analyzer Index Power Down screen, 39 power offAppendix Model

3110 specifications

The Teledyne 3110 is a sophisticated, high-performance data acquisition and analysis system that has garnered attention in a range of scientific and industrial applications. Designed with advanced technologies, the Teledyne 3110 is optimized for versatility, enabling users to gather and analyze data from various sources with seamless integration.

One of the main features of the Teledyne 3110 is its modular design. This allows users to customize the system to meet their specific needs by adding or removing modules as necessary. It supports a wide range of input types, making it compatible with numerous sensors and devices, which enhances its utility in diverse environments.

The device boasts high precision and accuracy in data collection, which is crucial for applications where minute measurements matter. The instrument employs cutting-edge analog-to-digital converters, ensuring that data is captured with remarkable fidelity. Additionally, the Teledyne 3110 incorporates advanced signal processing technologies that improve data quality and reduce noise, facilitating clearer and more reliable analysis results.

Another key characteristic of the Teledyne 3110 is its user-friendly interface. The system comes equipped with intuitive software for data visualization and analysis, allowing users, even those with limited technical experience, to navigate the system efficiently. With comprehensive data export options, users can easily integrate the system's outputs into other software for further analysis and reporting.

Durability and reliability are also hallmarks of the Teledyne 3110. Built to endure harsh environments, the system is tested rigorously to ensure it meets high standards for protection against dust, moisture, and temperature variations. This robustness makes it applicable in fields such as environmental monitoring, industrial automation, and research laboratories.

Furthermore, the Teledyne 3110 supports real-time monitoring and data logging capabilities. This feature is essential for applications that require continuous oversight and data collection to respond promptly to any changes in conditions or parameters being monitored.

In summary, the Teledyne 3110 stands out as a versatile and reliable data acquisition system, leveraging modularity, precision, user-friendliness, and durability to serve a variety of applications effectively. Whether for research, industrial applications, or environmental monitoring, the Teledyne 3110 proves to be an invaluable tool for professionals seeking high-quality data insights.
Top Page Image Contents