Teledyne 3110 operating instructions Cell Warranty

Page 43

Portable Trace Oxygen Analyzer

Maintenance

 

 

in such a way as to obviate any possibility of incurring damage. Under no circumstances should you disturb the integrity of the cell package until the cell is to be actually used. If the cell package is punctured and air permitted to enter, the cell will immediately start to react to the presence of oxygen.

CAUTION: THE MICRO-FUEL CELL CONTAINS KOH SOLUTION, WHICH IS CAUSTIC. SHOULD THE CELL RUPTURE, A LEAK MAY CAUSE INJURY. PLEASE REFER TO MATERIAL SAFETY DATA SHEET IN THE APPENDIX TO LEARN ABOUT POTENTIAL HAZARDS AND CORRECTIVE ACTION IN CASE OF ACCIDENT.

No tools are required to replace the cell in the instrument. Simply unscrew (counterclockwise) the plug at the bottom of the analyzer and the cell will drop out of the manifold cavity.

Remove the new cell from its package, and carefully remove the shorting clip. Do not touch the silver-colored sensing surface of the cell, as it is covered with a delicate Teflon membrane that can be ruptured in handling.

Place the cell on the end of the cell holder cap so that the sensing surface of the cell is in contact with the cap and the electrical contact plate end of the cell is facing upwards. Insert the cell and cap in the manifold cavity, and screw the cap back into place. Apply as much pressure as you can with your fingers, but use no tools.

After the cell has been installed, purge the instrument with an inert gas (or the sample), and then proceed as directed in section 3.1.1.

4.6 Cell Warranty

The Class B-2C, A-2C, B-2CXL and Insta Trace micro-fuel cells used in the Model 3110 are warranted for six (6) months of service.

With regard to spare cells, service time starts when the cell is removed from its oxygen barrier packaging. The customer should stock only one spare cell per instrument at a time. Do not attempt to stockpile spare cells.

If the Model 3110 is used in trace analysis applications where CO2 is a major component in the sample, the A2C micro-fuel cell should be used. At low CO2 concentrations (1,000 PPM or less) the standard B2C

Teledyne Analytical Instruments

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Teledyne Analytical Instruments ModelIi Teledyne Analytical Instruments ModelPortable Trace Oxygen Analyzer Specific Model InformationIv Teledyne Analytical Instruments Safety MessagesPortable Trace Oxygen Analyzer Table of Contents Appendix Maintenance & TroubleshootingIndex Teledyne Analytical Instruments Viii Teledyne Analytical Instruments List of FiguresCombustible GAS Usage Introduction IntroductionIntroduction Model Portable Trace Oxygen Analyzer Introduction FeaturesIntroduction Model Method of Analysis Cell WarrantyMicro-Fuel Cell Accuracy and Response Signal OutputCompact Packaging Portable Trace Oxygen Analyzer Introduction Intentionally left blank Portable Trace Oxygen Analyzer Installation InstallationCharging the Batteries Gas Connections Installation ModelPortable Trace Oxygen Analyzer Installation Installing a Trace Sensor Sensor InstallationCalibration Calibration Procedure for Trace AnalysisBleeding the Regulator and Purging the Gas Line Set the Sample Flow rateExternal Signal Enter Key OperationFront Panel Interface Operation ModelEscape Key Portable Trace Oxygen Analyzer Operation3 UP/DOWN Keys Available Menus and Their Sequence Operation and Setup Screens and MenusHome Screen Power on ScreenDate Screen Time Screen EnterAlarm Enable Standard Alarm ScreenHI-LOW Alarm Screen FS Alarm ScreenLtch Alarm Screen Range 2 Screen Range 1 ScreenRange Screen Span Screen Span Value ScreenFilter Screen LOG Intv Screen LOG Reset & Start ScreenLOG Transmit Screen Power Down Screen Portable Trace Oxygen Analyzer Operation Maintenance Model Maintenance & TroubleshootingRoutine Maintenance Replacing the BatteryPortable Trace Oxygen Analyzer Maintenance Battery Power Supply ServiceBattery Charger Port on the Model Cell ReplacementCell Warranty Temperature Compensation Effects of CO2 on B-2 Cell Life Effect of CO2 on B-2 Cell LifeProcedure Leak TestingIntentionally left blank Appendix SpecificationsAppendix Model Portable Trace Oxygen Analyzer Appendix Spare Parts ListIndex Portable Trace Oxygen Analyzer Index Power Down screen, 39 power offAppendix Model

3110 specifications

The Teledyne 3110 is a sophisticated, high-performance data acquisition and analysis system that has garnered attention in a range of scientific and industrial applications. Designed with advanced technologies, the Teledyne 3110 is optimized for versatility, enabling users to gather and analyze data from various sources with seamless integration.

One of the main features of the Teledyne 3110 is its modular design. This allows users to customize the system to meet their specific needs by adding or removing modules as necessary. It supports a wide range of input types, making it compatible with numerous sensors and devices, which enhances its utility in diverse environments.

The device boasts high precision and accuracy in data collection, which is crucial for applications where minute measurements matter. The instrument employs cutting-edge analog-to-digital converters, ensuring that data is captured with remarkable fidelity. Additionally, the Teledyne 3110 incorporates advanced signal processing technologies that improve data quality and reduce noise, facilitating clearer and more reliable analysis results.

Another key characteristic of the Teledyne 3110 is its user-friendly interface. The system comes equipped with intuitive software for data visualization and analysis, allowing users, even those with limited technical experience, to navigate the system efficiently. With comprehensive data export options, users can easily integrate the system's outputs into other software for further analysis and reporting.

Durability and reliability are also hallmarks of the Teledyne 3110. Built to endure harsh environments, the system is tested rigorously to ensure it meets high standards for protection against dust, moisture, and temperature variations. This robustness makes it applicable in fields such as environmental monitoring, industrial automation, and research laboratories.

Furthermore, the Teledyne 3110 supports real-time monitoring and data logging capabilities. This feature is essential for applications that require continuous oversight and data collection to respond promptly to any changes in conditions or parameters being monitored.

In summary, the Teledyne 3110 stands out as a versatile and reliable data acquisition system, leveraging modularity, precision, user-friendliness, and durability to serve a variety of applications effectively. Whether for research, industrial applications, or environmental monitoring, the Teledyne 3110 proves to be an invaluable tool for professionals seeking high-quality data insights.
Top Page Image Contents