Teledyne 3110 Charging the Batteries, Portable Trace Oxygen Analyzer Installation

Page 17

Portable Trace Oxygen Analyzer

Installation

 

 

Installation

The Model 3110 Trace Oxygen Analyzer is designed to be portable and easy to setup and configure. To setup the analyzer:

Read the Manual

Charge the battery

Install the sample and vent gas lines

Install the trace sensor and purge the analyzer

Calibrate the analyzer

Set the sample gas flow rate

2.1Charging the Batteries

The unit is powered by 2 Intrinsically Safe rated sub-C Ni-Cd batteries and is shipped with batteries fully charged. The batteries, however, will require periodic recharging. For recharging, access to an AC power source of 100 to 240 volt, 50/60 Hz will be required and the instrument should not be recharged in a hazardous area. Connect the universal AC charger adapter supplied with the instrument to the AC power outlet. Plug the other end of the charger into the port on the rear panel as shown in Figure 2-1. The green charge indicator LED should be illuminated to indicate that the unit is charging.

To fully recharge a set of batteries will take approximately 16 hours. The instrument should not be left on the charger for longer than 20 hours nor should the charger be left attached to the instrument when the unit is not charging. The Model 3110 cannot be operated while the battery charger is attached.

CAUTION: DO NOT CHARGE THE BATTERY IN A HAZARDOUS AREA. THE INTRINSICALLY SAFE CLASSIFICATION OF THIS INSTRUMENT DOES NOT APPLY WHEN THE CHARGER IS ATTACHED TO THE INSTRUMENT. REMOVE THE INSTRUMENT TO A NON-HAZARDOUS AREA BEFORE CONNECTING THE BATTERY CHARGER TO THE INSTRUMENT.

Teledyne Analytical Instruments

17

Image 17
Contents Teledyne Analytical Instruments ModelIi Teledyne Analytical Instruments ModelPortable Trace Oxygen Analyzer Specific Model InformationIv Teledyne Analytical Instruments Safety MessagesPortable Trace Oxygen Analyzer Table of Contents Index Teledyne Analytical Instruments Maintenance & TroubleshootingAppendix Viii Teledyne Analytical Instruments List of FiguresCombustible GAS Usage Introduction Model IntroductionIntroduction Portable Trace Oxygen Analyzer Introduction FeaturesIntroduction Model Micro-Fuel Cell Cell WarrantyMethod of Analysis Compact Packaging Signal OutputAccuracy and Response Portable Trace Oxygen Analyzer Introduction Intentionally left blank Charging the Batteries InstallationPortable Trace Oxygen Analyzer Installation Gas Connections Installation ModelPortable Trace Oxygen Analyzer Installation Installing a Trace Sensor Sensor InstallationCalibration Calibration Procedure for Trace AnalysisBleeding the Regulator and Purging the Gas Line Set the Sample Flow rateExternal Signal Front Panel Interface OperationOperation Model Enter Key3 UP/DOWN Keys Portable Trace Oxygen Analyzer OperationEscape Key Available Menus and Their Sequence Operation and Setup Screens and MenusDate Screen Power on ScreenHome Screen Time Screen EnterAlarm Enable Standard Alarm ScreenHI-LOW Alarm Screen FS Alarm ScreenLtch Alarm Screen Range 2 Screen Range 1 ScreenRange Screen Span Screen Span Value ScreenFilter Screen LOG Intv Screen LOG Reset & Start ScreenLOG Transmit Screen Power Down Screen Portable Trace Oxygen Analyzer Operation Routine Maintenance Maintenance & TroubleshootingReplacing the Battery Maintenance ModelPortable Trace Oxygen Analyzer Maintenance Battery Power Supply ServiceBattery Charger Port on the Model Cell ReplacementCell Warranty Temperature Compensation Effects of CO2 on B-2 Cell Life Effect of CO2 on B-2 Cell LifeProcedure Leak TestingIntentionally left blank Appendix Model SpecificationsAppendix Portable Trace Oxygen Analyzer Appendix Spare Parts ListIndex Portable Trace Oxygen Analyzer Index Power Down screen, 39 power offAppendix Model

3110 specifications

The Teledyne 3110 is a sophisticated, high-performance data acquisition and analysis system that has garnered attention in a range of scientific and industrial applications. Designed with advanced technologies, the Teledyne 3110 is optimized for versatility, enabling users to gather and analyze data from various sources with seamless integration.

One of the main features of the Teledyne 3110 is its modular design. This allows users to customize the system to meet their specific needs by adding or removing modules as necessary. It supports a wide range of input types, making it compatible with numerous sensors and devices, which enhances its utility in diverse environments.

The device boasts high precision and accuracy in data collection, which is crucial for applications where minute measurements matter. The instrument employs cutting-edge analog-to-digital converters, ensuring that data is captured with remarkable fidelity. Additionally, the Teledyne 3110 incorporates advanced signal processing technologies that improve data quality and reduce noise, facilitating clearer and more reliable analysis results.

Another key characteristic of the Teledyne 3110 is its user-friendly interface. The system comes equipped with intuitive software for data visualization and analysis, allowing users, even those with limited technical experience, to navigate the system efficiently. With comprehensive data export options, users can easily integrate the system's outputs into other software for further analysis and reporting.

Durability and reliability are also hallmarks of the Teledyne 3110. Built to endure harsh environments, the system is tested rigorously to ensure it meets high standards for protection against dust, moisture, and temperature variations. This robustness makes it applicable in fields such as environmental monitoring, industrial automation, and research laboratories.

Furthermore, the Teledyne 3110 supports real-time monitoring and data logging capabilities. This feature is essential for applications that require continuous oversight and data collection to respond promptly to any changes in conditions or parameters being monitored.

In summary, the Teledyne 3110 stands out as a versatile and reliable data acquisition system, leveraging modularity, precision, user-friendliness, and durability to serve a variety of applications effectively. Whether for research, industrial applications, or environmental monitoring, the Teledyne 3110 proves to be an invaluable tool for professionals seeking high-quality data insights.